Product Manual

11
4. Raise saddle to vehicle support point vehicle, continue to rotate handle clockwise until load
support point is secure. Do not raise any higher than load stability will allow.
5. Check to ensure vehicle is secure before working on, around or under.
LOWERING THE JACK STAND
1. Ensure that all tools, equipment and personnel are clear before lowering load.
2. DO NOT EVER LOWER STAND UNLESS VEHICLE AND COMPNENTS ARE 100%
SUPPORTED SECURELY. DO NOT EVER ASSUME LOAD IS SECURE, CHECK BEFORE
LOWERING.
3. With rotate the handle COUNTER-CLOCKWISE, lower stand clear of support point.
4. Carefully release stopper and allow ratchet to glide down to lowest position.
5. Carefully remove stand, then carefully lower vehicle on car lift.