Product Manual

4
* Position the Jack Stand
Position the jack stand to only support on the areas of the vehicle as specified by the vehicle manufacturer.
* Always Support Load
After lifting the vehicle always support the load with appropriately before working on the vehicle.
* Do Not Overload
Do not overload this equipment beyond its rated capacity. Overloading this equipment beyond its rated
capacity can cause damage to or failure.
* Always Use on Hard Level Surfaces
This product is designed only for use on hard level surfaces capable of sustaining the load. Use on
unstable or other possible loss of load.
* Center Load on Jack Saddle
Center load on saddle before lifting vehicle working on vehicle.
Off-center loads and loads lifted when the Jack Stand is not level can cause loss of load or damage to the
jack stand.
*Do not raise or lower the vehicle unless tools, materials and people are clear.
When the lift is being lowered, make sure everyone is standing at least six feet away. Be sure there are
no tools or equipment left under or around before lowering.
* Always lower slowly.
* Wear ANSI-approved safety glasses and heavy duty work gloves during use.
* Do not move or dolly vehicle while jack stand is in use.
* Stay alert. Use caution and common sense when operating Jack stand. Do not use Jack Stand
when tired, incoherent, dizzy, under the use or drugs or alcohol.
Training
-Read this manual before use. Do not allow anyone who has not read this manual, and/or does not
understand the requirements, use the equipment.
Spectators
-Do not allow bystanders around an Jack Stand or under the load supported only by the Jack Stand. Do
not allow anyone in the vehicle while the Jack Stand is in use. Keep all bystanders away from vehicle when
in use.
Inspection
-Inspect the Jack Stand carefully before each use. Ensure the j Jack Stand is not damaged, excessively
worn, or missing parts.
-Do not use the Jack Stand unless it is properly functioning.
-Using a Jack Stand that is not in good clean working condition or properly lubricated may cause serious
injury.
Do not modify the in any way. Unauthorized modification may impair the function and/or safety and could
affect the life of the equipment. There are specific applications for which the equipment was designed.
Always check for damaged or worn out parts before using. Broken parts will affect the equipment
operation. Replace or repair damaged or worn parts immediately.
When jack is not in use, store it in a secure place out of the reach of children. Inspect it for good working
condition prior to storage and before re-use.
DO NOT USE wood blocks or any other non-approved load sustaining devices.
DO NOT USE wood blocks or any other non-approved means of lifting with the Jack Stand and or
load being raised.