Product Manual

5
Assembly
Use the exploded drawing as your guide to assembly. Lay all parts and assemblies out in front of
you before beginning. The following procedure is recommended:
All numbers in parenthesis () refer to the index number from the parts breakdown.
1. To mount the Rubber Pad (1) with the Saddle (2), use Screw M6X10 (3).
2. Attach (7) connector plate with component hardware: (8) L-Bracket (Middle Bridge) (7), using
Bolt M10X20 (4), Washer 10 (5), Nut M10 (6).
3. Tri-pod Assembly: