Product Manual

16
8. Replace the cover plate (45).
9. Perform Air Purge Procedure.
ADDITIONAL WARNINGS:
DO NOT USE MOTOR OIL IN THE JACK.
ONLY USE ANTI-FOAMING JACK OIL.
ALWAYS USE A GOOD GRADE HYDRAULIC JACK OIL.
DO NOT USE HYDRAULIC BRAKE FLUID, ALCOHOL, GLYCERINE, DETERGENT, MOTOR OIL OR
DIRTY OIL.
USE OF A NON-RECOMMENDED FLUID CANCAUSE DAMAGE TO A JACK.
AVOID MIXING DIFFERENT TYPES OF FLUID AND NEVER USE BRAKE FLUID, TURBINE OIL,
TRANSMISSION FLUID, MOTOR OIL OR GLYCERIN. IMPROPER FLUID CAN CAUSE PREMATURE
FAILURE OF THE JACK AND THE POTENTIAL FOR SUDDEN AND IMMEDIATE LOSS OF LOAD.
DISPOSE OF HYDRAULIC FLUID IN ACCORDANCE WITH LOCAL REGULATIONS.
ADDITIONAL LUBRICATION:
1. Periodically check the pump piston and ram for signs of rust or corrosion. Clean as needed and wipe with an
oil cloth. NEVER USE SANDPAPER OR ABRASIVE MATERIAL ON THESE SURFACES!
2. 2. When not in use, store the jack with pump piston and ram fully retracted.
TROUBLESHOOTING
JACK
WILL
NOT
LIFT
LOAD
JACK
WILL
NOT
HOLD
LOAD
JACK
WILL
NOT
LOWER
POOR
JACK
LIFTING
WILL NOT
LIFT TO FULL
EXTENSION
CAUSES AND SOLUTIONS


Release valve is not completely closed
(Turn handle clockwise).

Weight Capacity Exceeded.


Air is in the hydraulics.
Purge air from system.




Low oil level. Add oil as required.

Oil reservoir is overfilled:
Drain excessive oil.
Lubricate moving parts.

Jack is binding or foreign obstruction



Power unit malfunctioning.
Replace the power unit.