Product Manual

15
6. Fill the oil case until oil level is just beneath the lower rim.
KEEP DIRT AND OTHER MATERIAL CLEAR WHEN POURING.
7. Replace oil plug.
i.
8. Perform the Air Purge Procedure.
ADDITIONAL WARNINGS:
 DO NOT USE MOTOR OIL IN THE JACK.
 ONLY USE ANTI-FOAMING JACK OIL.
 ALWAYS USE A GOOD GRADE HYDRAULIC JACK OIL.
 DO NOT USE HYDRAULIC BRAKE FLUID, ALCOHOL, GLYCERINE, DETERGENT, MOTOR OIL OR DIRTY
OIL.
 USE OF A NON-RECOMMENDED FLUID CANCAUSE DAMAGE TO A JACK.
 AVOID MIXING DIFFERENT TYPES OF FLUID AND NEVER USE BRAKE FLUID, TURBINE OIL,
TRANSMISSION FLUID, MOTOR OIL OR GLYCERIN. IMPROPER FLUID CAN CAUSE PREMATURE FAILURE
OF THE JACK AND THE POTENTIAL FOR SUDDEN AND IMMEDIATE LOSS OF LOAD.
 DISPOSE OF HYDRAULIC FLUID IN ACCORDANCE WITH LOCAL REGULATIONS.
Additional Bottle Jack Lubrication:
1. Periodically check the pump piston and ram for signs of rust or corrosion. Clean as needed and wipe with an oil
cloth. NEVER USE SANDPAPER OR ABRASIVE MATERIAL ON THESE SURFACES!
2. When not in use, store the jack with pump piston and ram fully retracted.