Product Manual

2
Thank you very much for choosing a Strongway product! For future reference, please complete the owner’s record
below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar
with this product before you begin using it.
This machine is designed for certain applications only. The distributor cannot be responsible for issues arising from
modification. We strongly recommend this machine not be modified and/or used for any application other than that for
which it was designed. If you have any questions relative to a particular application, DO NOT use the machine until you
have first contacted the distributor to determine if it can or should be performed on the product.
For technical questions please call 1-800-222-5381.
INTENDED USE
This Bottle Jack is designed for lifting. The jack can be used vertically or angled to 3 degrees from vertical position.
After lifting, loads must be immediately supported by jack stands. Each model is suitable for use in lifting or positioning
vehicles, machinery, houses and/or other building structures. These jacks comply with ASME PALD Standards.
TECHNICAL SPECIFICATIONS
Description
Item
46241
Maximum Capacity
40,000 lbs.
Minimum Lift Height
6-5/8 inches
Maximum Lift Height
10-7/8 inches
Screw Top Adjustment
1-1/4 inches
Product Size
6.18in. x 6.02 in. x 6.61in.
Weight
19.38 lbs.
Safe Operating Temperature is between 40°F – 105°F (4°C - 41°C)
GENERAL SAFETY RULES
WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in
serious injury.
CAUTION: Do not allow persons to operate or assemble this jack until they have read this manual and
have developed a thorough understanding of how the jack works.
WARNING: The warnings, cautions, and instructions discussed in this instruction manual cannot
cover all possible conditions or situations that could occur. It must be understood by the operator that common
sense and caution are factors which cannot be built into this product, but must be supplied by the operator.