Workstation Fan (12/18/24in.) Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Strongway product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This fan is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operation Warnings .......................
Intended Use This workstation fan directs airflow where needed. Heavy-duty design with powerful air circulator. Technical Specifications Item No. Size Volts/Hz. Current (A) 49886 12 in. 120V/60Hz. 0.42 49887 18 in. 120V/60Hz. 1.05 49888 24 in. 120V/60Hz. 2.5 CFM RPM 2100 1500 3500 1500 8800 1100 Important Safety Information • Read and understand all instructions. Failure to follow all instructions may result in serious injury or property damage.
• This product may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. • Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
PERSONAL SAFETY • Stay alert, watch what you are doing, and use common sense when operating the tool. Do not use the tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating the tool may result in serious personal injury. • Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
FAN USE AND CARE • Check for damaged parts before each use. Carefully check that the fan will operate properly and perform its intended function. Replace damaged or worn parts immediately. Never operate the fan with a damaged part. • Do not use a fan with a malfunctioning switch. Any fan that cannot be controlled with the power switch is dangerous and must be repaired by an authorized service representative before using.
Grounding • This machine must be grounded while in use to protect the operator from electrical shock. This drill press is equipped with an electrical cord that has an equipment grounding conductor and a grounding plug. The plug MUST be plugged into a matching receptacle that is properly installed and grounded in accordance with ALL local codes and ordinances. • DO NOT MODIFY THE PROVIDED PLUG. If it will not fit the receptacle, have the proper receptacle installed by a qualified electrician.
Extension Cords • USE A PROPER EXTENSION CORD. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage, resulting in loss of power and cause overheating. • Be sure your extension cord is properly wired and in good condition. Always replace a damaged extension cord or have it repaired by a qualified person before using it.
Assembly 1. Mark the desired hole locations by using the wall bracket, then drill holes. 2. For concrete wall installation; after drilling, insert the wall anchors and tap them flush with the wall, position the bracket and then screw the two bolts into the anchors, securely attaching to the wall. 3. For wall stud installation; after drilling the smaller diameter pilot hole, position the bracket and screw the two bolts into the wall until they are secured.
Maintenance Maintain your fan. It is recommended that the general condition of any fan be examined before it is used. Keep your fan in good repair by adopting a program of conscientious repair and maintenance in accordance with the recommended procedures found in this manual. 1. Depending on the usage and severity, a regularly scheduled inspection should be established. 2. Check for unusual noises when circulator is running. 3. Periodically inspect and tighten all bolts, screws and set screws.
Troubleshooting Symptom Possible Cause(s) Fan may not be plugged in. Unit fails to operate .There may be some obstructions in the fan. Symptom Excessive vibration Possible Cause(s) Nuts mounting motor to rear guard are torque insufficiently Propeller imbalance due to accumulation of dirt, etc. Corrective Action Make sure the fan is plugged in and electrical outlet is working properly. Check for any obstruction. If you find an obstruction, turn the fan “OFF”.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Bannon product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by Northern Tool and Equipment Company, Inc. Burnsville, Minnesota 55306 NorthernTool.
