Product Manual B

Page 6 of 16
before using.
 Disconnect the power/air supply from the product and place the switch in the locked or off position
before making any adjustments, changing accessories, or storing the tool. Such preventive safety
measures reduce the risk of starting the tool accidentally.
 Store the product when it is not in use. Store it in a dry, secure place out of the reach of children.
Inspect the tool for good working condition prior to storage and before re-use.
 Use only accessories that are recommended by the manufacturer for use with your product.
Accessories that may be suitable for one product may create a risk of injury when used with
another tool. Never use an accessory that has a lower operating speed or operating pressure than
the tool itself.
 Keep guards in place and in working order. Never operate the product without the guards in place.
 Do not leave the tool running unattended.
Specific Operation Warnings
⚠WARNING
 Ensure the power switch is OFFbefore plugging in the fan.
 Electric shock hazard. Do not expose to water or rain.
 Be sure equipment is properly grounded.
 Use only outdoor-rated extension cords of proper size.
 Do not use this product with any solid-state speed control device.
 Rotating blade hazard. Can cause serious injury or cut. Keep hands clear.
 DO NOT operate without guards in place.
 Turn power OFF before servicing.
 Not for use by or around children.
Grounding
⚠WARNING
 This machine must be grounded while in use to protect the operator from electrical shock. This
unit is equipped with an electrical cord that has an equipment grounding conductor and a
grounding plug. The plug MUST be plugged into a matching receptacle that is properly installed
and grounded in accordance with ALL local codes and ordinances.
 DO NOT MODIFY THE PROVIDED PLUG. If it will not fit the receptacle, have the proper
receptacle installed by a qualified electrician.
 CHECK with a qualified electrician or service person if you do not completely understand the
grounding instructions, or if you are not sure the tool is properly grounded.