30in. Oscillating Pedestal Fan Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Strongway™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code (if applicable): _____________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This fan is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operation Warnings .......................
Intended Use The Strongway 30 Inch Oscillating Fan is designed to provide high velocity cooling, ventilation, and circulation of commercial environments. Technical Specifications Property Voltage Watts Amps CFM/RPM Specification 120V~/ 60Hz 220/1.8 8778/1100 Important Safety Information ⚠WARNING • Read and understand all instructions. Failure to follow all instructions may result in serious injury or property damage.
⚠WARNING WORK AREA SAFETY • Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit. Cluttered, wet, or dark work areas can result in injury. Using the product in confined work areas may put you dangerously close to cutting tools and rotating parts. • Do not use the fan where there is a risk of causing a fire or an explosion; e.g., in the presence of flammable liquids, gases, or dust.
the power switch is dangerous and must be repaired by an authorized service representative before using. • Disconnect the power/air supply from the product and place the switch in the locked or off position before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally. • Store the product when it is not in use. Store it in a dry, secure place out of the reach of children.
Grounding ⚠WARNING • This machine must be grounded while in use to protect the operator from electrical shock. This unit is equipped with an electrical cord that has an equipment grounding conductor and a grounding plug. The plug MUST be plugged into a matching receptacle that is properly installed and grounded in accordance with ALL local codes and ordinances. • DO NOT MODIFY THE PROVIDED PLUG. If it will not fit the receptacle, have the proper receptacle installed by a qualified electrician.
draw. An undersized cord will cause a drop in line voltage, resulting in loss of power and cause overheating. • Be sure your extension cord is properly wired and in good condition. Always replace a damaged extension cord or have it repaired by a qualified person before using it. Protect your extension cords from sharp objects, excessive heat and damp or wet areas. • Grounded tools require a 3-wire extension cord. Double Insulated tools can use either a 2- or 3wire extension cord.
2. Insert the PIVOT BOLT through the motor FLANGE, PLINTH, and washer. Attach with nut. Tighten firmly. 3. Insert smaller POSITION SCREW through bottom radius and attach with washer and nut. Tighten firmly. Grill/Motor Assembly 1. Unscrew the SCREWS from the motor. 2. Set the REAR GUARD in its proper position. 3. Attach the REAR GUARD by inserting and tightening the SCREWS to the motor (through the eyelets on the guard). 4.
• Do not use this fan with any solid-state speed control device. • Only plug the unit into a power outlet with the same voltage as rated voltage of it. • Rotating blade hazard. Keep hands clear to avoid serious injury. • Do not operate in the presence of explosive and/or flammable fumes. • Do not plug/unplug the fan into/from the electrical outlet while wet or standing in a wet or damp area. • Never operate the fan without the guard in place. • For indoor use only. Do not use outdoors.
NOTE: It is normal for the motor to feel warm to the touch after continuous operation. This fan features a thermostat that will automatically shut off, should it overheat for any reason. If this happens, immediately unplug the fan from the outlet. Wait approximately 15 minutes before plugging back in. After Each Use Be sure the fan speed setting is in the OFF position. Maintenance ⚠WARNING • Unplug from power source before cleaning fan. Maintain your fan.
Parts Diagram Parts List Part Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Part Description Front Guard Grill Screw Set Screw Blade Screws Back Guard Motor Oscillation Cam Flange (attached to motor) Plinth Position Screw Pivot Bold Inner Tube Connector Set Knob Outer Tube Screws (to attach outer tube coupling to base) Coupling (attached to outer tube) Base Nut (to attach outer tube coupling to base) Page 12 of 15 Quantity 1 1 1 1 4 1 1 1 1 1 1 1 1 1 1 1 5 1 1 5
Replacement Parts • For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. • Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence. • When ordering parts, the following information will be required: item description, item model number, item serial number/item lot date code, and the replacement part reference number.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or "Us'') warrants to the original purchaser only ("You'' or "Your") that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
