Product Manual

Page 10 of 13
Assembly
No assembly required.
Before Each Use
 Place fan on flat, stable surface.
Operating Instructions
1. Plug fan into grounded power outlet.
2. Direct fan to area of desired air flow. Select speed for cooling.
Select air speed by setting switch to either HIGH-LOW -OFF.
NOTE: It is normal for the motor to feel warm to touch after continuous operation. This fan features a
thermostat that will automatically shut off should it overheat for any reason. If this happens,
immediately unplug the fan from the outlet. Wait approximately 15 minutes before plugging back in.
After Each Use
Be sure fan speed control is in OFF position.
Maintenance
Maintain your fan. It is recommended that the general condition of any fan be examined before it
is used. Keep your fan in good repair by adopting a program of conscientious repair and maintenance.
Have necessary repairs made by qualified service personnel
CLEANING:
WARNING: UNPLUG FROM ELECTRICAL SUPPLY BEFORE CLEANING.
1. Use a soft, damp cloth (water only) for cleaning, then wipe with dry cloth.
2. Don’t not use cleaners that harm paints or plastics; i.e., bleach or ammonia.
3. Do not bend blades
Parts Diagram