ATV Log Arch and Holder Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Strongway™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This ATV Log Arch and Holder is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operation Warnings .......................
Intended Use The Strongway ATV Log Arch and Holder easily moves logs up to 1,000 pounds with a length of 20 feet. It minimizes snagging and keeps logs mud-free during transport. Technical Specifications Property Log Diameter (in.) Log Length (ft.) Log Weight (lbs.) Tires (in.) Construction Specification 24 20 1,000 16.5" x 4.8"-8" Steel Important Safety Information ⚠WARNING Read and understand all instructions. Failure to follow all instructions may result in serious injury or property damage.
work areas may put you dangerously close to cutting tools and rotating parts. Keep children and bystanders away from the work area while operating the tool. Do not allow children to handle the log arch and holder. ⚠WARNING PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operating the log arch and holder. Do not use the tool while you are tired or under the influence of drugs, alcohol, or medication.
Do not exceed the rated load capacity and rated log dimensions. Wear steel toed boots and heavy duty leather gloves while handling logs. Do not exceed speeds of 10 MPH. Do not over inflate skidding arch tires. Over inflation may cause tires to burst or the rim to separate, causing serious personal injury. Do not operate on steep inclines. Skidding arch may tip over. Do not allow riders on the logging dolly. This log skidding arch is not DOT certified. Not for public road use.
Main Parts of Log Arch & Holder Part # Description Qty. Part # Description Qty. 1 Nut M20 4 15 Hex Bolt M10x35 9 2 16.
Part # Description Qty. Part # Description Qty. 8 Right Arm 1 21 M12 Nut 2 9 Pulling Rod 1 22 M12 Lock Nut 2 10 Spring Washer 21 23 M20 Lock Nut 2 11 Nut M10 21 24 Washer M20 2 12 Hex Bolt M10x75 11 25 16.
Wear steel toed boots and heavy duty leather gloves while handling logs. Do not over inflate skidding arch tires. Over inflation may cause tires to burst or the rim to separate, causing serious personal injury. Check for damaged parts before each use. Do not use if parts are damaged. Operating Instructions ⚠WARNING Wear ANSI Z87.1 compliant safety goggles. Do not exceed the rated load capacity and rated log dimensions.
Note: Logs will be easier to move and stay mud-free with less snagging if you use the Rear Log Holder (#27) to hold the logs. However, if the transporting distance is short, or the log is not very large, you can use the log arch and holder alone to hold and skid the log. After Each Use Store an idle log arch and holder in a secure place out of the reach of children. Inspect it for good working condition prior to storage and before re-use.
Parts Diagram Page 11 of 14
Parts List Part # Description Qty. Part # Description Qty. 1 Nut M20 4 15 Hex Bolt M10x35 9 2 16.5" Front Wheel 2 16 Flat Washer 4 3 Axle 2 17 Sleeve 6 4 Left Arm 1 18 Mud Remover 2 5 Front Chain 1 19 Coupler 1 6 Flat Washer 42 20 U Clamp 1 8 Right Arm 1 21 M12 Nut 2 9 Pulling Rod 1 22 M12 Lock Nut 2 10 Spring Washer 21 23 M20 Lock Nut 2 11 Nut M10 21 24 Washer M20 2 12 Hex Bolt M10x75 11 25 16.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
