ATV Log Skidding Arch with Winch Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Strongway™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This ATV Log Skidding Arch with Winch is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operation Warnings .......................
Intended Use The Strongway ATV Log Skidding Arch with Winch handles logs up to 18 inches diameter. It’s ideal for use on the back of an ATV. It allows for minimal snagging while keeping logs mud-free during transport. Technical Specifications Property Log Diameter (in.) Log Weight (lbs.) Tires (in.) Construction Specification 18 1,000 16.5"x 4.8"-8" Steel Important Safety Information ⚠WARNING Read and understand all instructions.
Cluttered, wet, or dark work areas can result in injury. Using the product in confined work areas may put you dangerously close to other cutting tools and rotating parts. Keep children and bystanders away from the work area while operating the logging dolly. Do not allow children to handle the product. ⚠WARNING PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operating the logging dolly.
Wear ANSI Z87.1 compliant safety goggles. Do not exceed the rated load capacity and rated log dimensions. Wear steel toed boots and heavy duty leather gloves while handling logs. Do not exceed speeds of 10 MPH. Do not over inflate skidding arch tires. Over inflation may cause tires to burst or the rim to separate, causing serious personal injury. Do not operate on steep inclines. Skidding arch may tip over. Do not allow riders on the logging dolly.
Main Parts of Log Skidding Arch Reference Number 1 2 3 4 5 6 7 8 9 Subassembly Vertical frame Pneumatic rubber tire (left & right) Frame dragging bar (left & right) Dragging bar Coupler Roller plate Manual winch Winch handle Chain Hardware bag： Page 7 of 15
Assembly Instructions ⚠WARNING Do not allow persons to operate or assemble this log skidding arch until they have read this manual and have developed a thorough understanding of how the product works. Take all parts out of the shipping package and inspect components to ensure there are no missing pieces before starting to assemble. 1.
3. Attach the dragging bar (#4) to the top of the vertical frame (#1) and attach them with 2 sets of M12 x 70 bolts, dia 12 washers, and M12 nuts. Connect the left and right frame dragging bar (#3) to the dragging bar (#4) with 2 sets of M12 x80 bolts, dia 12 washers, and M12 nuts. Tighten all the nuts in steps 2 and 3. 4. Attach the coupler (#5) to the top of the dragging bar (#4) with 4 sets of M12 x80 bolts, dia 12 washers, and M12 nuts. 5.
7. Connect the log skidding arch with the coupler (#5) provided. Before Each Use ⚠WARNING Wear ANSI Z87.1 compliant safety goggles. Wear steel toed boots and heavy duty leather gloves while handling logs. Do not over inflate skidding arch tires. Over inflation may cause tires to burst or the rim to separate, causing serious personal injury. Check for damaged parts before each use. Do not use if parts are damaged. Operating Instructions ⚠WARNING Wear ANSI Z87.1 compliant safety goggles.
and then lift the log by rotating the winch handle forwards. 3. Wrap the log with chain (#9) and attach it with the lock of the chain. 4. Remove the timber jack (not provided). After Each Use Store an idle log skidding arch in a secure place out of the reach of children. Inspect it for good working condition prior to storage and before re-use. Maintenance Maintain the log skidding arch by adopting a program of conscientious repair and maintenance in accordance with the following recommended procedures.
Parts Diagram Page 12 of 15
Parts List Part # Description Qty.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
