Product Manual

Page 10 of 15
7. Connect the log skidding arch with the coupler (#5) provided.
Before Each Use
⚠WARNING
 Wear ANSI Z87.1 compliant safety goggles.
 Wear steel toed boots and heavy duty leather gloves while handling logs.
 Do not over inflate skidding arch tires. Over inflation may cause tires to burst or the rim to
separate, causing serious personal injury.
 Check for damaged parts before each use. Do not use if parts are damaged.
Operating Instructions
⚠WARNING
 Wear ANSI Z87.1 compliant safety goggles.
 Do not exceed the rated load capacity and rated log dimensions.
 Wear steel toed boots and heavy duty leather gloves while handling logs.
 Do not exceed speeds of 10 MPH.
 Do not over inflate skidding arch tires. Over inflation may cause tires to burst or the rim to
separate, causing serious personal injury.
 Do not operate on steep inclines. Skidding arch may tip over.
 Do not allow riders on the logging dolly.
 This log skidding arch is not DOT certified. Not for public road use.
 Not for use by or around children.
1. Place the log under the log skidding arch and hold the end of log with a timber jack (not provided).
2. Rotate the winch (7#) backwards so the strap and hook go down along the wheel on the strap
holder assembly (#6) to the ground. Wrap the strap around the log end, use the strap hook to lock,