Product Manual

Page 9 of 15
3. Attach the dragging bar (#4) to the top of the vertical frame (#1) and attach them with 2 sets of
M12 x 70 bolts, dia 12 washers, and M12 nuts. Connect the left and right frame dragging bar (#3)
to the dragging bar (#4) with 2 sets of M12 x80 bolts, dia 12 washers, and M12 nuts. Tighten all
the nuts in steps 2 and 3.
4. Attach the coupler (#5) to the top of the dragging bar (#4) with 4 sets of M12 x80 bolts, dia 12
washers, and M12 nuts.
5. Use the bolt and nut at the end of the roller plate (#6) to fasten it to the top of the dragging bar
(#4).
6. Attach the manual winch (#7) onto the top of the dragging bar (#4) with 2 sets of M10 x50 bolts,
dia 10 washers, and M10 nuts. Firmly install the winch handle (#8) and make sure it’s on the left
side of the winch. Hang the chain (#9) on the 2 hooks of the vertical frame (#1).