Heavy-Duty Sawhorse Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Strongway™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This Heavy-Duty Sawhorse is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operation Warnings .......................
Intended Use The Strongway Heavy-Duty Sawhorse provides a safe, easy way to make cuts in timber while standing up. It holds logs up to 800 lbs., up to 8 feet long, and 16 inches in diameter. Technical Specifications Property Log Diameter (in.) Log Length (ft.) Log Weight (lbs.) Specification 16 8 800 Important Safety Information ⚠WARNING Read and understand all instructions. Failure to follow all instructions may result in serious injury or property damage.
⚠WARNING PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operating the sawhorse. Do not use the tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating the tool may result in serious personal injury. Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
Do not modify the sawhorse in any way. Unauthorized modification may impair the function and/or safety and could affect the life of the sawhorse. There are specific applications for which the sawhorse was designed. Always check for damaged or worn out parts before using the sawhorse. Broken parts will affect the operation of the sawhorse. Replace or repair damaged or worn parts immediately.
Part # Description Qty. 1 X -shape holder 4 2 Plastic pipe plug 8 3 Connecting rod 4 4 M10x80 bolt and nut set 16 Assembly Instructions ⚠WARNING Do not allow persons to operate or assemble this sawhorse until they have read this manual and have developed a thorough understanding of how the product works. Take all parts out of the shipping crate and inspect components to ensure there are no missing pieces before starting to assemble. 1.
4. Assemble 2 more X-shape holders (#1) in between, one by one. Fasten with the M10x80 bolt and nut sets (#4). Do not completely tighten the nuts. 5. Install 2 more connecting rods (#1) onto the 4 X-shape holders (#1) with M10x80 bolts and nut sets (#4). Tighten all nuts securely. Before Each Use ⚠WARNING Do not modify the sawhorse in any way. Unauthorized modification may impair the function and/or safety and could affect the life of the equipment.
Operating Instructions ⚠WARNING Do not exceed the log length, diameter, or rated load capacity. Note: To hold the short logs easily, you may use the other 3 holes in the connecting rods to adjust the distance between the middle X-shape holder and the ending X-shape holder. Place the sawhorse on a clean and flat ground where it remains balanced. Fasten the sawhorse to the ground firmly with 8 anchor bolts (not provided), if necessary.
Parts Diagram Parts List Part # Description Qty. 1 X holder 4 2 Plastic pipe plug 8 3 Connecting rod 4 4 M10x80 bolt and nut set 16 Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.