Hydraulic Furniture Movers Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Strongway™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This Hydraulic Furniture Movers set is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operation Warnings .......................
Intended Use The Hydraulic Furniture Mover set is designed for lifting and transporting cabinets and other large pieces of furniture. Its supports are covered with foam rubber to protect furniture from damage. Since the furniture mover consists of two units, rectangular objects of varying length can be moved using minimum space. Due to the weight of the cabinet on the platform, it will hold itself in position when the units are standing vertically and the frame of the platform is in contact with its sides.
areas may put you dangerously close to cutting tools and rotating parts. Do not allow the furniture mover to come into contact with an electrical source. The tool is not insulated and contact will cause electrical shock. Keep children and bystanders away from the work area while operating the furniture mover. Do not allow children to handle the furniture mover. Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards in your work area.
Specific Operation Warnings ⚠WARNING Do not exceed loading capacity. Only use on a hard level surface. Ensure the load is secure by load constraining straps before moving. Do not use the if the height of the furniture exceeds 32 inches or if the units are less than 20 inches apart or more than 157 inches apart. Check both units for damage before operating the furniture mover. If there are visible defects, do not use the machine.
The steering handles have a full lock of 180°, allowing goods to be transported in every direction. The platforms are raised by operating the lever of the pump; this lever must not be used for pulling or pushing the mover. The platform is lowered by twisting the manual release valve of the compact hydraulic system counter-clockwise. Great care must be taken when lowering the platform since the speed depends on the aperture of the valve as well as the weight of the goods to be transported.
Parts Diagram Page 8 of 12
Parts List Reference Description Qty 01 Dust-Proof Cover 4 02 Cushion 2 03 Lock Nut M10 2 04 Woven Stripe 1 05 Screw M10×70 2 06 Lifting Frame 1 07 Cargo Lashings 1 08 Supporting Frame 1 09 Nylon Washer 2 10 Cylindrical Spring Pin 6×30 2 11 Handle Assembly 2 12 Hand Tube 1 13 Split Ring 9 2 14 Hydraulic Jack 1 15 Screw M6×20 2 16 Split Ring 8 2 17 Pin 1 18 Dust-Proof Ring 2 19 Bearing 8204 2 20 Supporting Rod 2 21 Screw M12×85 2 22 Washer 12
Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence. When ordering parts, the following information will be required: item description, item model number, item serial number/item lot date code, and the replacement part reference number.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.