Vertical Drum Puller Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Strongway™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This Vertical Drum Puller is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operating Warnings .......................
Intended Use Strongway’s Vertical Drum Puller is ideal for vertically lifting and lowering 55-gallon drums without spilling oil or other fluids. It’s made of heavy-duty, all-steel construction. Technical Specifications Property Drum Size (gal.) Load Capacity (lbs.) Dimensions L x W x H (in.) Specification 55 1,100 20 59/64 x 10 5/8 x 7 3/32 Important Safety Information ⚠WARNING Read and understand all instructions. Failure to follow all instructions may result in serious injury or property damage.
⚠WARNING PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operating the tool. Do not use the tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating the tool may result in serious personal injury. Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
Assembly Instructions Before assembly, make sure all the parts listed in Figure 1 are included in the package. Figure 1 Assembly Instructions 1. Line up the holes of the Active Arm (#5) to the holes of the Fixed Arm (#4). 2. Insert the Pin Shaft (#2) through the holes of the Active Arm (#5) and the Fixed Arm (#4). 3. Place the Washer (#3) on the end of the Pin Shaft (#2) and insert the Cotter Pin (#1) through the Pin Shaft (#2). 4. Bend back the Cotter Pin (#1) to prevent the Pin Shaft (#2) from slipping.
1. Manually position lift pad portion of the Fixed and Active Arms onto the side of the drum puller to be lifted (Figure 2). Figure 2 2. Attach the top of the Fixed Arm (#4) to the lifting crane hook. Slowly raise the drum puller, making sure the lift pads are securely gripped under the drum rim (Figure 3). Figure 3 3. Slowly lift the drum and carefully transport to the desired location. 4. The drum puller is designed to allow placement of the drum in a steel or poly over pack drum. 5.
Maintenance Maintain the drum puller by adopting a program of conscientious repair and maintenance. It is recommended that the general condition of any tool be examined before it is used. Keep your drum puller clean and in good repair. Inspect • • Hardware should be checked for tightness. Tighten as required. Frames should be inspected for wear or damage.
Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence. When ordering parts, the following information will be required: item description, item model number, item serial number/item lot date code, and the replacement part reference number.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
