/2 in Steel Strapping Tensioner Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Strongway™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This tensioner is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Operating Instructions ............................
Intended Use The Strongway tensioner is a manual tool to be used with 1/2 in. steel strapping. It’s ideal for the paper, wood, stone, steel, and glass industries. It’s used to fix and tighten the strap before sealing snap the seal and cut the strap after sealing. It has separate the tension and sealing to tensioner and sealer which is more easy for operation.
⚠WARNING This product may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. ⚠WARNING WORK AREA SAFETY Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit. Cluttered, wet, or dark work areas can result in injury. Using the tensioner in confined work areas may put you dangerously close to other cutting tools and rotating parts.
the tool itself. Operating Instructions Step 1: Press the handle down and place the strap inside the tensioner. Note: The direction of the upper strapping must be the same as the tensioner. Step 2: Move the handle to tension the strapping. Step 3: Press the handle and handle pawl (as shown below) down to release the strapping.
Maintenance This tensioner has been thoroughly inspected and tested before shipment. It is designed for durability and long service. It is recommended that the general condition of any tool be examined before it is used. Keep your tool in good repair. Simple maintenance will prolong the serviceability of your tool. Clean this tool periodically with a wire brush. Apply light machine oil to all moving parts. Parts Diagram Parts List Part# Description Qty. Part# Description Qty.
7 Hatchet Gear 1 17 Long Pawl 1 8 Support Frame 1 18 Short Pawl 1 9 Shaft 1 19 Clutch Plug 1 10 Bushing 1 20 Clutch Plug Pin 1 Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
