40 Inch x17 Inch Workstation Cart Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Strongway™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This Workstation Cart is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operation Warnings .......................
Intended Use Heavy-duty structural foam construction makes this Strongway Workstation Cart tough enough for long, rugged use. It’s easy to assemble and handles a wide variety of industrial and commercial handling needs. Technical Specifications Property Capacity Overall Size Shelf Size Wheel Large Bin Small Bin Specification 500 lbs. 39-1/2” X 17-1/8” X 33-5/8” 31-1/8” X 17-1/8” X 4-5/16” 5” Non-Marring, Rubber, 2 Fixed, 2 Swivel 8 Bins, 9-1/4 X 5-7/8 X 5 IN 24 Bins, 6-1/2 X 4-1/8 X 3 IN.
Cluttered, wet, or dark work areas can result in injury. Using the product in confined work areas may put you dangerously close to other cutting tools and rotating parts. Keep children and bystanders away from the work area while operating the tool. Do not allow children to handle the product. ⚠WARNING PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operating the tool. Do not use the tool while you are tired or under the influence of drugs, alcohol, or medication.
causing product failure. Do not allow riders. Use only on a hard level surface. Inspect before each use. Do not use if parts are damaged. Assembly Instructions Refer to the parts diagram for the following assembly instructions. 1. Place one Tray (2) upside down on the work surface. Locate the Handle (1). Turn it upside down with the cup holder toward the Tray (2) and the hand holes on the outside. Using a rubber mallet, tap the Handle (1) down into the grooves on the Tray (2). See Figure A. 2.
Before Each Use ⚠WARNING Inspect the unit before every use; do not use if parts are loose or damaged. After Each Use ⚠WARNING Store unit in a dry location to prevent rust.
. Parts List Reference 1 1 Part Number Part Description HANDLE Quantity 1 2 2 TRAY 1 3 3 LH POST 2 4 4 RH POST 2 5 5 TRAY 1 6 6 CARRIAGE BOLT 16 7 7 CASTER 2 8 8 WASHER 16 9 9 NUT 16 10 10 FIXED WHEEL 2 11 11 SCREW 12 12 12 NUT 4 13 13 SCREW 4 14 14 SMALL STORAGE BIN 24 15 15 LARGE STORAGE BIN 8 16 16 BIN SUPPORT BRACKET 3 17 17 VERTICAL SUPPORT BRACKET 1 18 18 SCREW 3 19 19 COLUMN ( L ) 3 Page 8 of 11
Reference 20 20 Part Number Part Description COLUMN ( R ) Quantity 3 21 21 SCREW 12 22 22 NUT 12 23 23 SCREW 8 Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
