Air/Hydraulic Pump Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Strongway™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This air/hydraulic pump is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operation Warnings .......................
Intended Use This Air/Hydraulic Pump supplies hydraulic fluid pressure to selected tools. It consists of an in-line air and hydraulic cylinder. The ratio of hydraulic fluid pressure generated compared to supply air pressure is 100:1. 100 PSI out for every 1 PSI in – 100 PSI input air pressure equals 10,000 PSI output pressure. Technical Specifications Property Usable Oil Capacity (in.) Rated Pressure (PSI) Input Air Pressure (PSI) Output Port Threads Input Port Threads Weight with Fluid (lb.
flammable liquids, gases, or dust. Do not allow the product to come into contact with an electrical source. The tool is not insulated and contact will cause electrical shock. Keep children and bystanders away from the work area while operating the tool. Do not allow children to handle the product. ⚠WARNING PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operating the tool.
Inspect the tool for good working condition prior to storage and before re-use. Use only accessories that are recommended by the manufacturer for use with your product. Accessories that may be suitable for one product may create a risk of injury when used with another tool. Never use an accessory that has a lower operating speed or operating pressure than the tool itself. Keep guards in place and in working order. Never operate the product without the guards in place.
1. Connect the hose of the pump to the hydraulic coupling on the selected tool. 2. Connect the air supply line to the pump. The air supply should be 5-10 CFM at 100 PSI to obtain proper operating functions. In addition, the air line should be equipped with an air line filter. 3. Step on the pump end of the pedal engager of the pump to produce the force necessary to run the tool. 4. Press the release end of the pump pedal to release the pressure.
4. Fill with good quality hydraulic jack oil as recommended above. Replace the vented oil plug. Lubrication Use a light machine oil to lubricate pivot points, hinges, etc. Troubleshooting Use the table below to troubleshoot problems before contacting service personnel or your local dealer. If the problem continues after troubleshooting, call your local dealer for assistance. Failure Application will not extend, move or respond to pressurized fluid.
Parts Diagram Page 9 of 12
Parts List Item No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Description Qty. Description Qty. 1 1 1 1 1 1 1 1 1 8 1 1 1 1 1 1 1 1 1 Item No.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or "Us'') warrants to the original purchaser only ("You'' or "Your") that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.