Manual Chain Hoist Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Strongway™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This hoist is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operation Warnings .......................
Intended Use The Strongway Manual Chain Hoist is a portable lifting device easily operated by a hand chain. It’s intended for loading and unloading goods in garages, workshops, and warehouses. It’s perfect for lifting in open air grounds and places where a power supply is not available. Technical Specifications Model Rated Capacity (lb.) Lift Height (ft.) Head Room (in.) Load Chain Dia.
may put you dangerously close to cutting tools and rotating parts. Do not use the product where there is a risk of causing a fire or an explosion; e.g., in the presence of flammable liquids, gases, or dust. The product can create sparks, which may ignite the flammable liquids, gases, or dust. Do not allow the product to come into contact with an electrical source. The tool is not insulated and contact will cause electrical shock.
before using. Disconnect the power/air supply from the product and place the switch in the locked or off position before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally. Store the product when it is not in use. Store it in a dry, secure place out of the reach of children. Inspect the tool for good working condition prior to storage and before re-use.
Before Each Use ⚠WARNING Before operating, make sure that the hoist is not in the free chain mode and always check that the selector is placed in the proper position. DO NOT touch or operate the hoist’s free knob while a load is applied to the hoist. Inspect for damaged parts before use. Do not use if damaged. Examine each chain link for damage or weak links before use. Do not operate a hoist with twisted, kinked or damaged chain.
Properly seat the sling or other device in the base (bowl or saddle) of the hook (Figure 2). Do not allow the hook hitch to support any part of the load. Do not apply the load to the point of the hook (Figure 2). Figure 2 Correct and incorrect hook attachment 1. Judge the weight of the load to be lifted and make sure it is not over the rated capacity of the chain hoist. Never overload the hoist on any occasion. 2.
oil and grease. Also refer to the engine manufacturer’s instruction manual for additional information about engine maintenance. The following chart is based on a normal operation schedule. Maintenance Interval Daily before operating Maintenance Point Inspect the general condition of the hoist. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, and any other condition that may affect its safe operation.
Parts Diagram Parts List Reference 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Part Number 1 2 3 4 5 43 6 7 8 9 10 11 12 13 14 15 16 17 Part Description Top Hook Assembly Safety Latch Assembly Top Hook Shaft Bottom Hook Assembly Load Pin Lock Nut Load Chain Lock Nut Rivet Name Plate Gear Cover Assembly Drive Shaft Spur Gear Assembly Snap Ring Load Gear Gear Side Plate Assembly Stripper Guide Roller Page 10 of 13 Qty.
Reference 19 48 49 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 47 40 41 42 46 43 44 45 Part Number 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 44 37 38 39 40 41 42 Part Description Roller Bearing for 1100lb.hoist only Roller Bearing for 2200lb.hoist only Roller Bearing for 4400,6600,11000lb.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or "Us'') warrants to the original purchaser only ("You'' or "Your") that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
