Product Manual

Page 10 of 17
7. To be able to install the disc, it is necessary to unscrew the auxiliary flange (Fig.6).
Before Each Use
⚠WARNING
 Inspect the whole condition of the sharpener for good working condition.
 Check the disc you are about to use for damages prior to installation.
Operating Instructions
⚠WARNING
 Wear the proper protective equipment including ANSI Z87.1 compliant eye protection, NIOSH
compliant breathing protection, and hearing protection.
 Do not use grinding wheels that have a max RPM less than the marked RPM rating on the tool.
 Keep hands clear from grinding wheel during use.
 Electric shock hazard. Do not expose to rain or use in damp locations.
 Do not use for wet grinding.
 Do not use wheel if cracked or chipped.
 Disconnect tools before servicing; when changing accessories, such as blades, bits, cutters, and
the like.
 Reduce the risk of unintentional starting. Make sure switch is in off position before plugging in.
 Direction of feed. Feed work into a blade or cutter against the direction of rotation of the blade or
cutter only.