500-Lb. Rapid Lift XT Hydraulic Table Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Strongway™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This hydraulic table is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operation Warnings .......................
Intended Use This Strongway 500-Lb. Rapid Lift XT Hydraulic Table is a hydraulic scissor lift table with easy footpedal operation. It's perfect in the factory, warehouse, office, or shop, making lifting, positioning, and transporting functions easier. Its ergonomic style makes the table safe and comfortable to use. Technical Specifications Property Load Capacity (lb.) Specification Raised Height (in.) 50 3/4 Lowered Height (in.) 14 1/4 Platform Size L x W (in.
of flammable liquids, gases, or dust. The product can create sparks, which may ignite the flammable liquids, gases, or dust. Do not allow the product to come into contact with an electrical source. The tool is not insulated and contact will cause electrical shock. Keep children and bystanders away from the work area while operating the tool. Do not allow children to handle the product. Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards in your work area.
another tool. Never use an accessory that has a lower operating speed or operating pressure than the tool itself. Keep guards in place and in working order. Never operate the product without the guards in place. Do not leave the tool running unattended. Specific Operation Warnings ⚠WARNING To prevent serious injury or property damage, read and understand owner’s manual before use. Do not exceed the rated load capacity. Be aware of dynamic loading.
Reference 4 5 Subassembly Casters Pump Assembly Instructions ⚠WARNING Use at least two people to lift out of the box. This product arrives partially assembled. The user will need to: 1. Assemble the Handle: Slide the ends of the handle into the handle slots on the base and secure with a hex bolt. 2. Install the Foot Pedal: Insert the pump lever with the foot pedal into the connecting rod and secure with a bolt.
Before Each Use ⚠WARNING Inspect the general condition of the table. Do not use lift table if damaged. Replace damaged parts before resuming operation. Test the cart operation by using the foot pedal and control lever. Make sure the table raises and lowers properly before adding weight to the table. Before raising the table top, lock the casters. Operating Instructions ⚠WARNING Do not exceed the rated load capacity. Be aware of dynamic loading.
Lower the Table The control lever controls the operation of the hydraulic pump unit. To lower the pump and table, squeeze the control lever When the control lever is released, the pump and table movement will stop and the table will remain stationary. Make sure the bars lock in place, and then squeeze the Control Level.
After Each Use ⚠WARNING To prevent accidents when finished using the cart, move the cart to a safe location and lock the locking swivel casters. When finished using the table, move it to a safe location. Lock the locking swivel casters and lower the table as far as it will go. Clean and store the table indoors, out of children’s reach. Maintenance ⚠WARNING Store your table in a location where it is protected from moisture, dirt, and a corrosive environment.
Troubleshooting ⚠WARNING If the table is not performing properly, you may need to bleed the air from the system. Use the table below to troubleshoot problems before contacting service personnel or your local dealer. If the problem continues after troubleshooting, call your local dealer for assistance. Failure Table fails to descend when first used table is not performing properly. Possible Cause Corrective Action Bottom of pull rod drops out from the bolt during transportation or assembly.
Parts Diagram Page 12 of 16
Parts List Reference 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 Part Description Protective Mat Table Scissor Arm (Upper) Roller (Upper) Retaining Ring 12 Pin Lock Nut M14 Washer 14 Axle Scissor Arm (Bottom) Screw M6x12 Roller (Bottom) Base Axle Retaining Ring 16 Lock Nut M12 Wheel 5" Busher Hex Bolt M12x85 Pump Hex Nut M8 Release Valve Link Washer 8 Bolt M8x25 PIN 8x40 COTTER PIN 2.
Reference 53 Part Description Hex Nut M10 Quantity 2 Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or "Us'') warrants to the original purchaser only ("You'' or "Your") that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.com Made in China.
