000-Lb. Rapid Lift XT Hydraulic Table Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Strongway™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This table is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operation Warnings .......................
Intended Use This Strongway 2-Speed Rapid Lift XT Table is a hydraulic scissor lift table with easy foot pedal operation. It's perfect in the factory, warehouse, office, or shop, making lifting, positioning, and transporting functions easier. Its ergonomic styling makes the table safe and comfortable to use. Technical Specifications Property Load Capacity (lb.) Specification Raised Height (in.) 54 1/2 Lowered Height (in.) 15 1/4 Platform Size L x W (in.
of flammable liquids, gases, or dust. The product can create sparks, which may ignite the flammable liquids, gases, or dust. Do not allow the product to come into contact with an electrical source. The tool is not insulated and contact will cause electrical shock. Keep children and bystanders away from the work area while operating the tool. Do not allow children to handle the product. Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards in your work area.
another tool. Never use an accessory that has a lower operating speed or operating pressure than the tool itself. Keep guards in place and in working order. Never operate the product without the guards in place. Do not leave the tool running unattended. Specific Operation Warnings ⚠WARNING To prevent serious injury or property damage, read and understand owner’s manual before use. Do not exceed the rated load capacity. Be aware of dynamic loading.
Reference 4 5 Subassembly Casters Pump Assembly Instructions ⚠WARNING Use at least two people to lift out of the box. The table arrives almost fully assembled; however, partial assembly is required. 1. Assemble the handle. Slide the ends of the handles into the handle slots on the base. Secure it with a hex bolt. 2. Install the foot pedal. Insert the pump lever (39) with foot pedal (40) into the connecting rod and secure with a bolt.
Before Each Use ⚠WARNING Inspect the general condition of the table. Do not use lift table if damaged. Replace damaged parts before resuming operation. Test the cart operation by using the foot pedal and control lever. Make sure the table raises and lowers properly before adding weight to the table. Before raising the table top, lock the casters. Operating Instructions ⚠WARNING Do not exceed the rated load capacity. Be aware of dynamic loading.
Lowering the Table Make sure the bars lock in place and squeeze the control level. After Each Use ⚠WARNING To prevent accidents when finished using the cart, move the cart to a safe location and lock the locking swivel casters. • Lower the table as far as it will go. • Clean and store the cart indoors out of the reach of children. Maintenance ⚠WARNING Store the table in a location where it is protected from moisture, dirt, and a corrosive atmosphere.
Before Use Inspect the general condition of the table. Check for loose hardware, misalignment of binding parts, cracked or broken parts, and any other condition that may affect its safe operation. Store your table in a location where it is protected from moisture, dirt, and corrosive atmosphere. Protect it from being damaged from other items being moved in and out of its storage area. After Use Occasionally check the condition of the casters.
Troubleshooting ⚠WARNING If the table is not performing properly, you may need to bleed the air from the system. Use the table below to troubleshoot problems before contacting service personnel or your local dealer. If the problem continues after troubleshooting, call your local dealer for assistance. Failure Table fails to descend when first used. Possible Cause Bottom of pull rod drops out from the bolt during transportation or assembly. Air enters into the oil gradually after some period of usage.
Parts Diagram Page 12 of 16
Parts List Reference 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 Part Description Protective Mat Table Scissor Arm (Upper) Roller (Upper) Retaining Ring 12 Pin Lock Nut M16 Washer 16 Axle Bottom Scissor Arm (Outer) Screw M8x12 Bottom Scissor Arm (Inner) Base Axle Retaining Ring 25 Lock Nut M12 Wheel 5" Busher Hex Bolt M12x85 Power Unit Hex Nut M8 Release Valve Link Washer 8 Bolt M8x25 PIN 8x40 Cotter Pin
Reference 53 54 55 56 57 58 59 60 61 62 Part Description Hex Nut M10 Bolt M8x16 Axle Cotter Pin 3.2x36 Slotted Nut M16x1.5 Composite Bearing Roller (Bottom) Roll Pin 6x26 Grease Cup Composite Bearing Quantity 2 2 2 2 2 4 2 2 1 4 Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or "Us'') warrants to the original purchaser only ("You'' or "Your") that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.com Made in China.