Product Manual

Page 11 of 18
The electric hoist is rated at a 750 lb. single line and 1500 lb. double line capacity.
Single Line Operation
During single line operation, the max rated load capacity is 750 lb. (340 kg). Do not exceed the max
rated load capacity. Single line loads can be connected with the support hook that comes already
attached to the wire cable. The load can be directly connected to the support hook (73) using a
properly rated hoisting sling, chain, or shackle. Make sure the load is directly underneath hoist and is
not at an angle.
Double Line Operation
During double line operation, the max rated load capacity is 1500 lb. Do not exceed the max rated
load capacity. Once the support hook is securely hooked into the double line support hole and the
safety clasp has been fully clasped, the pulley hook can be attached to the wire cable. Follow these
steps for attaching the pulley hook to the wire cable.
1. Remove the washers (81), nuts (75 and 76), and bolts (71 and 72) from the pulley.
73