Product Manual

Page 6 of 18
before using.
 Disconnect the power/air supply from the product and place the switch in the locked or off position
before making any adjustments, changing accessories, or storing the tool. Such preventive safety
measures reduce the risk of starting the tool accidentally.
 Store the hoist when it is not in use. Store it in a dry, secure place out of the reach of children.
Inspect the tool for good working condition prior to storage and before re-use.
 Use only accessories that are recommended by the manufacturer for use with your product.
Accessories that may be suitable for one product may create a risk of injury when used with
another tool. Never use an accessory that has a lower operating speed or operating pressure than
the tool itself.
 Keep guards in place and in working order. Never operate the product without the guards in place.
 Do not leave the tool running unattended.
Specific Operation Warnings
⚠WARNING
 Improper use can cause risk of fire, electric shock, or personal injury.
 Do not exceed the rated load capacity.
 Only operate the hoist when the load is centered under the hoist.
 Inspect the rope before each use. Only operate the hoist when the rope is in good working
condition. Do not use if it is twisted, kinked, or damaged.
 Inspect the hoist before each use. Do not use if it is damaged or malfunctioning in any way.
 Not intended to lift people or animals. Lifting people may result in severe injury or death.
 Keep bystanders away. Do not control hoist under load. Do not lift loads over people.
 Ensure rope is properly seated in its groove before operation.
 Do not reverse wrap cable in drum. The up switch should always lift the load.
 Always leave a minimum of 4 wraps on the drum. The fastener between the cable and hoist is not
rated for maximum capacity.
Grounding
⚠WARNING
 This machine must be grounded while in use to protect the operator from electrical shock. This
unit is equipped with an electrical cord that has an equipment grounding conductor and a
grounding plug. The plug MUST be plugged into a matching receptacle that is properly installed
and grounded in accordance with ALL local codes and ordinances.
 DO NOT MODIFY THE PROVIDED PLUG. If it will not fit the receptacle, have the proper
receptacle installed by a qualified electrician.
 CHECK with a qualified electrician or service person if you do not completely understand the