Product Manual

Page 10 of 17
Main Parts of #56767
Reference
Subassembly
1
Digital display window- Shows charging current, voltage, and battery capacity %
and error codes.
2
Charging State LED indicator – When battery is charging, green light will flash.
When battery is fully charged, green light will be solid.
3
Current/Volt/Battery capacity % LEDs – When chosen to display current, volts,
or battery capacity % on the digital display, the respective LED will emit a green
light and will show on the display.
4
Display selection button – Controls which measurement is shown on the digital
display (Amp, Volt, or battery capacity %).
5
Charging rate selection button – Press the button to interchange between the
charging rates 6V 2A, 12V 2A, and 12V 8A.
6
Charging rate indicators- The corresponding LED will light up to indicate the
charging rate selected.
Before Each Use
⚠WARNING
 To prevent serious injury and property damage read and understand the owner’s manual before
use.
 Avoid touching your eyes while working with a battery. Have plenty of fresh water and soap nearby