Product Manual

Page 6 of 17
 Secure the work with clamps or a vise instead of your hand when practical. This safety precaution
allows for proper tool operation using both hands.
⚠CAUTION
CHARGER USE AND CARE
 Do not force the charger. Products are safer and do a better job when used in the manner for
which they are designed. Plan your work, and use the correct product for the job.
 Check for damaged parts before each use. Carefully check that the product will operate properly
and perform its intended function. Replace damaged or worn parts immediately. Never operate the
product with a damaged part.
 Do not use a product with a malfunctioning switch. Any power tool that cannot be controlled with
the power switch is dangerous and must be repaired by an authorized service representative
before using.
 Disconnect the power/air supply from the product and place the switch in the locked or off position
before making any adjustments, changing accessories, or storing the tool. Such preventive safety
measures reduce the risk of starting the tool accidentally.
 Store the product when it is not in use. Store it in a dry, secure place out of the reach of children.
Inspect the tool for good working condition prior to storage and before re-use.
 Use only accessories that are recommended by the manufacturer for use with your product.
Accessories that may be suitable for one product may create a risk of injury when used with
another tool. Never use an accessory that has a lower operating speed or operating pressure than
the tool itself.
⚠WARNING
 To prevent serious injury and property damage read and understand the owner’s manual before
use.
 Avoid touching your eyes while working with a battery. Have plenty of fresh water and soap nearby
for use in case battery acid contacts your eyes, skin or clothing. If this happens, wash immediately
with soap and water, and then get medical attention.
 Risk of explosion. Batteries contain acid and produce explosive gases. Keep sparks, flames, and
cigarettes away from the battery at all times.
 Risk of fire and explosion. Do not overcharge battery.
 Wear ANSI Z87.1 compliant safety goggles and face shield during use.
 Risk of electric shock. Unplug cord before servicing. Connect to a GFCI outlet. Do not use in wet
conditions.
 Do not use an extension cord.
 Remove metal items such as rings, bracelets and necklaces while working with this charger. Lead
acid batteries can produce a short circuit high enough to cause burns.
 Use only in a well-ventilated area.