Product Manual

Page 6 of 10
Grounding
⚠WARNING
 This machine must be grounded while in use to protect the operator from electrical shock. This
scale is equipped with an electrical cord that has an equipment grounding conductor and a
grounding plug. The plug MUST be plugged into a matching receptacle that is properly installed
and grounded in accordance with ALL local codes and ordinances.
 DO NOT MODIFY THE PROVIDED PLUG. If it will not fit the receptacle, have the proper
receptacle installed by a qualified electrician.
 CHECK with a qualified electrician or service person if you do not completely understand the
grounding instructions, or if you are not sure the tool is properly grounded.
Before Each Use
1． Connect the AC port of the adaptor with AC while inserting the DC port of the adaptor to the
faucet titled in the under pan of the scale.
2． Adjust the scale feet before using to ensure the scale is placed evenly.
3． Place the scale in an environment of stability and non-electromagnetism interference.
4． Turn on the power switch, the three displays will flash the number from 0 to 9 in succession and
then back to 0. The zero tracking indicator light will turn on. If the weight is not at zero, please
press the zero tracking key to change it to zero.
Operating Instructions
Key Chart
 WEIGHT lbs. - To display the weight or net weight of the unit.
 UNIT WEIGHT lbs.- To display the average weight of samples; to display the unit weight known
set.
 NUMBER PCS: To display the total number.
 →0← light: When the light is on, the weight is at zero.
 TARE light: When the light is on, tare is deducted.
 M+ light - When the light is on, the accumulation function is in use.
 NUMBER light: When the light is on, the alarm number is set.
 CHARGE light: When the light is on, the scale is charging. When the battery is charging, the light
will begin to dim. When the battery is full, the light is off.