Pedestal Fan Dolly Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Strongway™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code (if applicable): _____________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This pedestal fan dolly is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Packaging Contents .............................................................................................................................. 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information .................
Intended Use The Strongway Pedestal Fan Dolly converts pedestal fans into mobile floor fans for easy portability from site to site. It’s easy to install with durable construction. The non-marring rubber wheels with bolton plastic hub provide easy mobility.
this equipment for a purpose for which it was not intended. • Industrial or commercial applications must follow OSHA requirements. ⚠WARNING WORK AREA SAFETY • Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit. Cluttered, wet, or dark work areas can result in injury. Using the product in confined work areas may put you dangerously close to cutting tools and rotating parts. • Do not use the product where there is a risk of causing a fire or an explosion; e.g.
Inspect the tool for good working condition prior to storage and before re-use. • Use only accessories that are recommended by the manufacturer for use with your product. Accessories that may be suitable for one product may create a risk of injury when used with another tool. Never use an accessory that has a lower operating speed or operating pressure than the tool itself.
Assembly Instructions 1. Attach the wheels (6) to the holder by using the wheel tube (15), the tube (4), a bolt (8), washer (7,16) and nut (9). Attach the tube cap (11) under the holder. 2. Place the fan rod between the sleeve (10). Insert the post collar (1) on the outside of the sleeve. Tighten with bolts (12 and 13) and a washer (14). Before Each Use Check that all connections on the dolly are secure. Operating Instructions Tilt the fan until the wheels contact on the ground.
After Each Use Store the fan dolly in a clean and dry area. Maintenance Maintain the pedestal fan dolly by adopting a program of conscientious repair and maintenance in accordance with the following recommended procedures. It is recommended that the general condition of any tool be examined before it is used. Keep your tool in good repair. Keep handles dry, clean, and free from oil and grease. The following chart is based on a normal operation schedule.
Parts Diagram Parts List Reference 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Part Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Part Description Post Collar Holder 1 Holder 2 Tube Hexagon Nut M8 Rubber Wheel Washer M10 Bolt M10x75 Nut M10 Sleeve Tube Cap Bolt M8x30 Bolt M6x12 Washer M8 Wheel Tube Washer Page 9 of 12 Quantity 2 2 2 2 4 2 4 2 2 2 2 4 2 4 2 4
Replacement Parts • For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. • Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence. • When ordering parts, the following information will be required: item description, item model number, item serial number/item lot date code, and the replacement part reference number.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or "Us'') warrants to the original purchaser only ("You'' or "Your") that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.