AIR CURTAIN (36/48/60IN.) Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Strongway product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This air curtain is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operation Warnings .......................
Intended Use The Strongway Air Curtain ventilates, circulates, and cools specific areas or tasks. Technical Specifications LOW Item Size Current Power (Amps) (Watts) HIGH Outlet Velocity (m/s) Noise Current Power (dB) (Amps) (Watts) Outlet Velocity (m/s) Noise (dB) 49947 36in. 2.1 255 16 56 2.85 345 20 59 49948 48in. 2.65 320 16 56 3.5 425 20 59 49949 60in. 3.6 440 16 56 4.8 5.75 20 59 Important Safety Information Read and understand all instructions.
This product may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operating the air curtain. Do not use the air curtain while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating the air curtain may result in serious personal injury. Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing and gloves away from moving parts.
FAN USE AND CARE Check for damaged parts before each use. Carefully check that the fan will operate properly and perform its intended function. Replace damaged or worn parts immediately. Never operate the fan with a damaged part. Do not use a fan with a malfunctioning switch. Any fan that cannot be controlled with the power switch is dangerous and must be repaired by an authorized service representative before using.
Grounding This machine must be grounded while in use to protect the operator from electrical shock. This drill press is equipped with an electrical cord that has an equipment grounding conductor and a grounding plug. The plug MUST be plugged into a matching receptacle that is properly installed and grounded in accordance with ALL local codes and ordinances. DO NOT MODIFY THE PROVIDED PLUG. If it will not fit the receptacle, have the proper receptacle installed by a qualified electrician.
Extension Cords USE A PROPER EXTENSION CORD. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage, resulting in loss of power and cause overheating. Be sure your extension cord is properly wired and in good condition. Always replace a damaged extension cord or have it repaired by a qualified person before using it.
Installation INSTALLATION DIMENSIONS (inch) A B C D E F G 36 2 16 4 1/3 10 8 1/2 8 5/8 48 8 16 4 1/3 10 8 1/2 8 5/8 60 14 16 4 1/3 10 8 1/2 8 5/8 INSTALLATION METHOD: WARNING: INSTALLATION AND ELECTRICAL CONNECTION MUST BE PERFORMED BY QUALIFIED TECHNICIAN. 1) Fastener bag: 6 sets of (M8X60L) fastening bolts, spring washers, and (M8) nuts. 2).Check to ensure the voltage/frequency on rating label is compliant with the local power source before use.
See diagram below. B. Install INSTALLATION PLATE on the wall: -Fix position of installation -Insert FIXING BOLT(S) and fill with cement for consolidation - After cement solidifies, install INSTALLATION PLATE on FIXING BOLT(S) and fasten it with WASHER(S), SPRING WASHER(S), and NUT(S). (See diagram on right) -Insure INSTALLATION PLATE is mounted securely. C. Install BODY of Unit. Hang up BODY of Unit onto the INSTALLATION PLATE. Check to insure it is secure, and then tighten the FIXING SCREWS.
3) Adjust air direction louvers to preferred positions (according to arrow in the following diagram) Maintenance 1) Install onto firm surface firm 2) Do not install air curtain in locations with exposure to water or with permanent exposure to high temperature and places close to explosive and corrosive gases. 3) Have reliable grounding set when in use. 4) In case of damage or breakdown, consult a qualified technician 5) Clean air curtain periodically (see instructions below). Maintain your air curtain.
Parts Diagram Parts List Part# Description Qty. Part# Description Qty. 1 AIR CURTAIN 1 4 5# BATTBRY 2 2 MOUNTING PLATE 1 5 BOLT, WASHER, SPRING-WASHER, NUT 6 each 3 REMOTE CONTROL 1 Troubleshooting If fan does not operate, disconnect electric for 30 seconds. Then reconnect electric. Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by Northern Tool and Equipment Company, Inc. Burnsville, Minnesota 55306 NorthernTool.