Product Manual

See diagram below.
B. Install INSTALLATION PLATE on the wall:
-Fix position of installation
-Insert FIXING BOLT(S) and fill with cement for
consolidation
- After cement solidifies, install INSTALLATION
PLATE on FIXING BOLT(S) and fasten it with
WASHER(S), SPRING WASHER(S), and
NUT(S). (See diagram on right)
-Insure INSTALLATION PLATE is mounted securely.
C. Install BODY of Unit. Hang up BODY of Unit onto the INSTALLATION PLATE.
Check to insure it is secure, and then tighten the FIXING SCREWS.
6) Other installation methods (See
following diagram)
NOTE: Use more than one
unit of air curtain with
appropriate length to fill up
the width of the doorway.
IMPORTANT: The recommended distance between 2 adjacent sets of air curtain is to be 1-2 inches.
Before Each Use
Be sure fan housing has not been opened or damaged.
Operating Instructions
1) Connect electric power
2) Press the keystroke of OFF, LO, HIGH on the switch to set speed to OFF, LO and HIGH
Press relevant function key stroke for remote controlling unit