Electric Chainsaw Sharpener With Bar Mount Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
® Thank you very much for choosing a Strongway product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This chainsaw sharpener with bar mount is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operation Warnings .......................
Intended Use This Strongway Electric Chainsaw Sharpener with Bar Mount allows chain sharpening without removing the chain from the bar. Technical Specifications Property Installed power Specification Electrical motor, max. 12V supply Wheel thickness 1/8 in. (3.2mm) and 3/16 in. (4.7 mm) Maximum speed 5500 RPM Important Safety Information ⚠WARNING Read and understand all instructions. Failure to follow all instructions may result in serious injury or property damage.
presence of flammable liquids, gases, or dust. The product can create sparks, which may ignite the flammable liquids, gases, or dust. Keep children and bystanders away from the work area while operating the tool. Do not allow children to handle the sharpener. ⚠WARNING PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operating the sharpener. Do not use the tool while you are tired or under the influence of drugs, alcohol, or medication.
Wear ANSI Z87.1 compliant safety goggles, hearing protection, a NIOSH compliant dust mask, and work gloves when operating the machine. Do not use grinding wheels that have a Max RPM less than the marked RPM Rating on the tool. Keep hands clear from grinding wheel during use. Electric shock hazard. Do not expose to rain or use in damp locations. Disconnect power before servicing machine. Ensure that the chain being sharpened is properly secured so it doesn't slip out.
Assembly Instructions 1. Adjust the black knob to attach the chainsaw sharpener on the saw bar tightly. 2. Attach the chain on the groove of the bar-mount. 3. Find the correct angle between the grinding wheel and the chain. 4. Lock this nut after step 3. 6. Set limiter board into proper position, as in the picture shown. 5. Adjust chain limiter device. 7. Adjust bolt M6 to attach the rotating angle of the grinding wheel.
Operating Instructions ⚠WARNING Wear ANSI Z87.1 compliant safety goggles, hearing protection, a NIOSH compliant dust mask, and work gloves when operating the machine. Do not use grinding wheels that have a Max RPM less than the marked RPM Rating on the tool. Keep hands clear from grinding wheel during use. Electric shock hazard. Do not expose to rain or use in damp locations. Use an outdoor rated extension cord.
maintenance in accordance with the recommended procedures found in this manual. If any abnormal vibrations or noise occurs, turn the tool off immediately and have the problem corrected before further use. Have necessary repairs made by qualified service personnel. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. Keep handles dry, clean, and free from oil and grease.
Parts List Parts # Description Qty Parts # Description Qty 1 Grinding wheel cover 1 16 Cable set 1 2 Self-tapping screw 1 17 Lock nut 1 3 Grinding wheel 1 18 Reset spring 4 4 Grinding wheel 1 19 Adjustment bolt 4 5A Grinding wheel cover board 1 20 Torsion limit board 1 5B Grinding wheel seat 1 22 Torsion 1 6 Axis Card 1 23 Elastic clip chain plate 2 7 Antifriction pad 1 24 Rotating seat 1 8 Torsion cover 2 25 Bearing spring 2 10 Body 1 26 Angle
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.