84in. Driveway Drag Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Strongway product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, the warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This 84” Driveway Drag is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operation Warnings .......................
Intended Use Use this 84” Driveway Drag to level your yard, driveway, or parking lot. Support bars accommodate standard concrete blocks up to 200 lbs. of extra weight. This drag tows easily behind an ATV or lawn tractor. Technical Specifications Property Working width Hitch Type Additional weight capacity Crown adjustment Specification 84 inches Pin style 200 lbs. Can be adjusted up to 1.25” on 7-ft. spread Important Safety Information Read and understand all instructions.
PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operating the tool. Do not use the tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating the tool may result in serious personal injury. Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
Specific Operation Warnings CRUSHING HAZARD Implement is heavy. Be careful when moving or lifting as hands, finders, feet, and other body parts can be crushed. DO NOT exceed this implement’s maximum speed of 5 MPH. Exceeding this speed may result in loss of control during transport or braking. Never allow riders on equipment. Keep bystanders at least 20 feet away while operating. Operate from tractor seat only.
Assembly Step 1: Assemble Right Side Grading Bar (11) onto Right Back Angle (12) using Bolt (4), Lock Washer (5), and Flat Washer (6) as shown. Right Back Angle Right Side Grading Bar Step 2: Assemble Left Side Grading Bar (19) onto Left Side Back Angle (16) using Bolt (4), Lock Washer (5), and Flat Washer (6) as shown. Left Back Angle Left Side Grading Bar Step 3: Assemble Right Side Back Angle (12) to Left Side Back Angle (16) using Bolt (15) and Lock Nut (8) as shown.
Step 6: Assemble Angle Bracket 1 (9), Angle Bracket 2 (13), and Angle Bracket 3 (14) onto the top of the Front and Back Angles using Bolt (18) and Lock Nut (8) as shown. Install Spacers (17) before lock nuts. Right Side Front Angle Right Side Front Angle Right Side Front Angle Step 7: Assemble Hitch Frame (3) to the Front Angles using Bolt (2) and Lock Nut (8) as shown. Front Angles Hitch Frame Step 8: Install Tow Bar (1) into Hitch Frame (3). Secure with Bolt (2) and Lock Nut (8) as shown.
Operating Instructions To grade a flat surface: 1. Adjust front digger teeth bars to the correct depth to ensure that you have enough loose gravel. 2. Add weight and distribute it evenly to level a given area. 3. Make sure grading bars are adjusted to the same height. To build a crown: 1. Adjust front digger teeth bars to the correct depth to ensure that you have enough loose gravel. 2. Set the rear grading bars down on outside edges to form slight crown in middle. 3.
Parts List Part No.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by Northern Tool and Equipment Company, Inc. Burnsville, Minnesota 55306 NorthernTool.
