300-lb Furniture and Crate Movers Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Strongway™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This 1300-lb Furniture and Crate Mover set is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Assembly Instructions .............................
Intended Use When operated properly, the 1300-lb Furniture and Crate Movers make lifting and moving furniture on a flat surface easy and worry-free. Technical Specifications Property Rated Pair Capacity Lift Height Lifting Plate Size Net Weight Specification 1320 lb 12 inches 9 inches x 5 inches 66 lbs Important Safety Information ⚠WARNING Read and understand all instructions. Failure to follow all instructions may result in serious injury or property damage.
⚠CAUTION MOVER USE AND CARE Use only accessories that are recommended by the manufacturer for your mover. Accessories that may be suitable for one tool may create a risk of injury when used on another tool. Do not force the mover. Products are safer and do a better job when used in the manner for which they are designed. Plan your work, and use the correct product for the job. Check for damaged parts before each use.
floor before leaving unattended. Never raise the furniture more than once inch off the floor. Always plan your route before moving furniture. Avoid any sudden movements. Operating Instructions ⚠WARNING The floor must be level, smooth, clean, and free of inclines and slopes. Make sure that the floor and the floor covering are built to hold the weight of the furniture and the mover. Secure or remove any loose objects that could cause the furniture to slope or tip while being moved.
Open the gear-housing lid with a screwdriver. Apply the grease with a brush by sliding the brush through the guide rail slot. Close the gear-housing lid by pressing down firmly. Check that the spindles and gears work properly.
Parts Diagram Page 8 of 12
Parts List Reference Number Description Quantity 01 Nut 1 02 Roller Weld Group 1 03 Nylon Tube 2 04 Rubber Tube 2 05 Clip 2 06 Supporting Base 1 07 Nut M12 2 08 Spring Washer 12 2 09 Washer 12 2 10 Wheel Frame 2 11 Bolt M12x80 2 12 Separator 4 13 Bearing 6204 4 14 Wheel 2 15 Axle Housing 2 16 Inner-Hex Screw M6x10 1 17 Woven Belt 1 18 Nut M6 1 19 Lifting Platform Group 1 20 Screw Rod 1 21 Plane Bearing 1 22 Driven Gear 1 23 Pin 5x30 1 2
31 Dust-proof Cover 1 32 Upper Plate 2 33 Ball 50 34 Ball 54 35 Lower Plate 2 36 Washer 2 37 Nut 2 38 Washer 1 39 Seating 1 40 Nut 1 41 Cargo Lashings 2 42 Nut 2 43 Screw 2 Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.