Large Hydraulic Bead Breaker Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Strongway™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This bead breaker is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operation Warnings .......................
Intended Use The Strongway Large Hydraulic Bead Breaker delivers up to 10,000 PSI of force and a 13.8-ton ram to break the toughest beads in seconds. To be used in conjunction with a 10,000 PSI hydraulic pump (manual or air) to quickly break beads. For use on 25 inch to 51 inch off the road 5-piece wheels. Has pry bar/bead loosening pockets. Technical Specifications Property Length (in) Ship weight (lb.
and contact will cause electrical shock. Keep children and bystanders away from the work area while operating the tool. Do not allow children to handle the product. ⚠WARNING PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operating the tool. Do not use the tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating the tool may result in serious personal injury. Dress properly.
another tool. Never use an accessory that has a lower operating speed or operating pressure than the tool itself. Keep guards in place and in working order. Never operate the product without the guards in place. Do not leave the tool running unattended. Specific Operation Warnings ⚠WARNING Risk of finger entrapment and laceration. Wear ANSI Z87.1 compliant protective goggles and equipment. Before use, fully deflate the tire.
Operating Instructions ⚠WARNING Risk of finger entrapment and laceration. Wear ANSI Z87.1 compliant protective goggles and equipment. Ensure the wheel is stable and the work area if free and clear of debris. Secure and fully support any vehicles. The bead breaker uses a long stroke and high force. Be careful not to damage or bend rim parts, like the flange butt weld, when using the bead breaker. 1.
Maintenance Checking a) Every time you use the bead breaker, check for leaks, damages, and missing, loose, or worn parts. b) We suggest skilled personnel inspect the bead breaker yearly, and that all defective parts are replaced with original parts supplied by the manufacturer (see parts list).
Parts List No. 1 2 3 4 5 6 7 8 9 10 11 Description Screw Washer Tie-in assembly Cylinder Return spring assy. Snap ring Washer O-ring Sealing washer Piston ring O-ring Size: mm M6 x 35 3/8”-18 32 39x4.6 31.5x3.55 Qty. 1 2 1 1 1 1 1 1 1 1 1 No. 12 13 14 15 16 17 18 19 20 21 22 Description Ram piston Pilot ring Bound ring Toe housing Table pin Toe body Screw Toe Top cap Snap ring Screw Size: mm M6x90 Qty.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or "Us'') warrants to the original purchaser only ("You'' or "Your") that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
