Product Manual

Page 8 of 12
Operation Instructions
This product does not have or include a switch. Once its well wired and the circuit is in the ON state,
it will be controlled by a home switch.
Before Using For the First Time
WARNING
Make sure the supply voltage is the same as the rated light voltage.
Check for damaged parts and damaged wires.
Maintenance
WARNING
To avoid personal injury, disconnect the power to the light and allow the unit to cool down before
performing maintenance.
There are no user serviceable parts inside the light. There is a risk of electric shock. Removal of
the lens will void the warranty.
Maintenance Interval
Maintenance Point
Every year.
Perform visual, mechanical, and electrical inspections.
Periodically as needed.
Clean the lens to ensure continued photometric performance.
Clean the lens with a damp, non-abrasive, lint-free cloth. Do
not use an abrasive, strong alkaline or acid cleaner, as
damage may occur.
Periodically as needed.
Inspect the heat sink to ensure that it is free of any
obstructions or contamination. Clean with a non-abrasive
cloth, if needed.
Troubleshooting
Failure
Possible Cause
Corrective Action
Light does not work.
Voltage is not correct.
Use a voltage meter to read the
voltage.
Incorrect wiring.
Check the wiring.