Fixed Straddle Leg Stacker Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Strongway™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, the warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This stacker is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Specific Operation Warnings ............................................................................................................... 6 Safety Labels ......................................
Intended Use The Strongway Pallet Stacker is used for high-lift loading and unloading and short distance transportation. Because sparks and an electromagnetic field are not generated, the stacker is especially suitable for truck loading and unloading, as well as the loading, unloading, and transportation of flammable and fire prohibited goods in workshops, warehouses, docks, stations, and freight yards. The stacker has smooth-lifting, flexible cornering and convenient operation.
⚠WARNING WORK AREA SAFETY Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit. Cluttered, wet, or dark work areas can result in injury. Using the stacker in confined work areas may put you dangerously close to other cutting tools and rotating parts. Keep children and bystanders away from the work area while operating the stacker. Do not allow children to handle the tool.
Specific Operation Warnings ⚠WARNING Do not exceed the rated load capacity. Operate indoors, on a hard level surface. Before moving, be sure load is centered and equally distributed on forks. Lock wheels before raising or lowering loads. NEVER exceed fork height of 19.5 inches when moving loads. NEVER allow people to sit on or ride the stacker. Do not use to transport people or animals. Keep people, animals, and personal property clear from under the load.
Before Each Use Always check for damages or worn-out parts before using the stacker. Broken parts will affect the stacker’s operation. Replace or repair damaged or worn parts immediately. Operating Instructions ⚠WARNING Loads must be evenly distributed on the forks and never overload the forks. Always lock the wheels when raising or lowering any loads. Operating the Handle Trigger The Trigger Handle in lower (bottom) position is for raising the forks.
The Trigger Handle in the top position (or pulling upward) is for lowering the forks. Squeezing the trigger will allow forks to lower. Stop squeezing the trigger when the forks are at the desired height. Operating the Foot Pedal The foot pedal can be used instead of the handle to raise the forks to the desired height.
Hand Lever Parts Diagram Hand Lever Parts List Part No.
Parts Diagram Page 10 of 16
Parts List Part No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 Description Quantity Hex nut M6 Screw M6x25 Lever plate Striker O-ring Ø4.87x1.8 Striker spring Striker valve seat Combined washer Ø20 O-ring Ø12.5x2.65 Steel ball Ø8 Bolt M8x50 Nut M8 Pin Ø3x15.
Fork Frame Assembly Parts Diagram Fork Frame Assembly Parts List Part No.
Final Assembly Parts Diagram Final Assembly Parts List Part No. 1 2 3 4 5 6 7 8 Description Quantity 2 8 28 8 2 4 2 2 10 Universal wheel Hex nut M10 Washer Ø10 Hex bolt M10x25 Support plate Hex Bolt M12x100 Straddle leg Front wheel pin Axial elastic backing ring Ø20 Front wheel 11 Bearing 60204 4 12 13 14 15 16 Spring washer Ø10 Hex bolt M10x35 Support bar Washer Ø12 Spring washer Ø12 16 16 2 12 12 9 4 2 Part No.
Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-218-9436296. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence. When ordering parts, the following will be required: Model Number, Serial Number/Lot Date Code, and Description.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.