00 Ft. String Lights with Metal Cages Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Strongway™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This light set is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operation Warnings .......................
Intended Use Strongway 100 Ft. String Lights with Metal Cages are a single solution for illuminating your garage, driveway, barn, or anywhere else you need a long string of continuous light. The 125V, 15 Amp, 12/3 cord with a grounded plug features a metal lamp holder spaced every 10 feet down the string.
Keep children and bystanders away from the work area while operating the tool. Do not allow children to handle the product. Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards in your work area. Some of these hazards may be hidden from your view and may cause personal injury and/or property damage if contacted. ⚠WARNING PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operating the tool.
the tool itself. Keep guards in place and in working order. Never operate the product without the guards in place. Do not leave the tool running unattended. Specific Operation Warnings ⚠WARNING Electrical Shock and Fire Hazard. Do not exceed the marked lamp holder wattage or string maximum wattage including any additional string loads. Do not plug in an additional light or appliance that exceeds 375 watts. Electric shock hazard.
Use plug cover when not in use. Not for use by or around children. Grounding ⚠WARNING This machine must be grounded while in use to protect the operator from electrical shock. This unit is equipped with an electrical cord that has an equipment grounding conductor and a grounding plug. The plug MUST be plugged into a matching receptacle that is properly installed and grounded in accordance with ALL local codes and ordinances. DO NOT MODIFY THE PROVIDED PLUG.
Extension Cords ⚠WARNING USE A PROPER EXTENSION CORD. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage, resulting in loss of power and cause overheating. Be sure your extension cord is properly wired and in good condition. Always replace a damaged extension cord or have it repaired by a qualified person before using it.
Main Parts of Light Set Reference 1 2 Subassembly 100 Ft String Lights Metal Lamp Guards Assembly Instructions ⚠WARNING This light set must be used with the lamp guards installed. Make sure the power is turned off. There is a risk of accidental starting, resulting in serious personal injury. Deviation from the assembly instructions may result in a risk of fire or electric shock. The light string must be supported every 10 feet. Do not use the conductors to support the light set.
Repeat the process until there are 5 string lights assembled. Note: Insert the bulb (not included) before or after assembling the guard. Before Each Use ⚠WARNING The light string must be supported every 10 feet. Do not use the conductors to support the light set. Hooks or a steel cable must be used. Always check damaged or worn out parts before using the work light. Broken parts will affect the work light operation. Inspect the general condition of the light.
Electric shock hazard. Do not use with an extension cord near water or where water may accumulate. Do not use in wet or damp areas. Electric shock hazard. Do not use while standing on wet or damp areas. Keep lamp at least 16 feet (5m) from pools and spas. Keep plugs and receptacles dry. For use only on GFCI protected circuits in accordance with article 590 of the NEC. Do not submerge the light in water. The light is not waterproof. Use extreme caution in any wet location.
Maintenance ⚠WARNING If the supply cord of this light is damaged, it must be replaced only by a qualified service technician. Procedures not specifically explained in this manual must be performed only by a qualified technician. Maintain the product by adopting a program of conscientious repair and maintenance in accordance with the following recommended procedures. It is recommended that the general condition of any tool be examined before it is used. Keep your tool in good repair.
Bulb may have been damaged in shipment. Check lamp with another bulb or check bulb with a continuity tester. If bad, replace the bulb. Bulb is damaged. Parts Diagram Parts List Reference 1 2 3 4 5 Part Description Power Cord, Plug, Outlet, and Socket Metal Guard Bolt and Nut Hooks (not shown) Carrying Bag (not shown) Quantity 1 10 20 10 20 Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381.
When ordering parts, the following information will be required: item description, item model number, item serial number/item lot date code, and the replacement part reference number. The distributor reserves the rights to make design changes and improvements to product lines and manuals without notice.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or "Us'') warrants to the original purchaser only ("You'' or "Your") that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
