Mini Lever Hoist Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Strongway™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This hoist is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operation Warnings .......................
Intended Use The Strongway Mini Lever Hoist is a portable lifting device easily operated by a hand chain. It’s suitable for loading and unloading goods in garages, workshops, and warehouses. It’s advantageous for lifting goods in open air grounds and places where a power supply is not available. Technical Specifications Model Rated Capacity (lb.) Lift Height (ft.) Head Room (in.) Load Chain Dia. (mm) Handle Length (in.) #57104 1100 5 12 4 x 12 6.15 #57106 1650 5 13.8 5 x 15 6.
and contact will cause electrical shock. Keep children and bystanders away from the work area while operating the tool. Do not allow children to handle the product. Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards in your work area. Some of these hazards may be hidden from your view and may cause personal injury and/or property damage if contacted.
Inspect the tool for good working condition prior to storage and before re-use. Use only accessories that are recommended by the manufacturer for use with your product. Accessories that may be suitable for one product may create a risk of injury when used with another tool. Never use an accessory that has a lower operating speed or operating pressure than the tool itself. Keep guards in place and in working order. Never operate the product without the guards in place.
Operating Instructions ⚠WARNING To reduce the risk of injury, operate hoist using manual power only. Do not exceed the rated load capacity. Do not use hoist with extension on lever handle. Do not use in a way that causes either hook to be side loaded. Do not use chain hoist as a sling. Do not support load on hook unless hook is designed for tip loading. Do not operate if restricted from forming a straight line from hook to hook in the direction of loading.
Properly seat the sling or other device in the base (bowl or saddle) of the hook (Figure 2). Do not allow the hook hitch to support any part of the load. Do not apply the load to the point of the hook (Figure 2). Figure 2 Correct and incorrect hook attachment Installation 1. Estimate the load that is to be lifted or moved and make sure it does not exceed the max load. 2. Make sure that the support to which the upper hook is attached is strong enough to hold several times the weight of the load.
Hoisting and Lowering Hoisting (Pulling) Set the selector lever to the left position for UP. Hoist the slacked load chain by turning the handle clockwise. Lowering (Releasing) Set the selector lever to the right position for DOWN. Lower the load by turning the handle counterclockwise. Free Chaining This position is for making quick adjustments of the load chain length. Set the selector lever to the middle position and pull the load chain out in the desired direction.
#57104 Parts Diagram Page 10 of 16
#57104 Parts List Reference 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 Part Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 Part Description Gear Plate Assembly Gear Cover Long Axis Splined Hole Wheel Jump Ring Brake Cover and Name Plate Upper Hook Pin Upper Hook Assembly Loose End Ring Lower Hook Assembly Stripper Chain Guider Roller Load Chain Side Plate Studs Brake Plate Assembly Pawl Spring Pawl
#57106 Parts Diagram #57106 Parts List Reference 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 Part Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 Part Description Right Gear Cover Kit Left Gear Cover Kit Cover Kit Gear Kit Lifting Sprocket Kit Self-lubricating Steel Bushing Handle Kit Lower Hook Assembly Loose End Ring Kit Upper Hook Assembly Long Axis Long Axis Washer Splined Hole Gear Hook Beam Block Chain Plate Guide Wheel Pawl Spring Pawl Pawl Shaft Washer Pawl Stop Colla
Reference 23 24 25 26 27 28 29 30 31 32 33 34 35 Part Number 23 24 25 26 27 28 29 30 31 32 33 34 35 Part Description Ratchet Brake Base Spring Brake Nut Cover Kit M6 Lock Nut Cam Handle Reversing Handle Reversing Pawl Shaft Spring Pin Reversing Ratchet Hand-wheel Hand-wheel Washer Quantity 1 1 1 1 9 1 1 1 1 1 1 1 1 #57135 Parts Diagram #57135 Parts List Reference 1 2 3 4 5 6 7 8 9 Part Number 1 2 3 4 5 6 7 8 9 Part Description Gear Plate Assembly Gear Cover Brake Cover, Name plate Load Chain Assembly
Reference 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 Part Number 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 Part Description Upper Hook Assembly Loose End Ring Lower Hook Assembly Upper Hook Pin Right Plate Assembly Brake Plate Assembly Pawl Spring Pawl Spring Brake Disc Pawl Ratchet Pawl Shaft Washer Spring Brake Spring Brake Nut Brake Cover M6 Lock Nut Cam M5 Lock Nut Handle Grip Selector Lever Spring Pin Hand-wheel Brake Washer M8 Lock Nut
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or "Us'') warrants to the original purchaser only ("You'' or "Your") that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.