44-LED Solar-Powered Motion Security Light Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing an Ironton™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This solar-powered light is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Assembly Instructions .............................
Intended Use The Ironton 144-LED Solar-Powered Motion Security Light provides brilliant illumination using the power of the sun without using electricity. For convenience, this powerful light is equipped with motion activation to automatically trigger the light when motion is detected within a 40 foot range. You can select how long you want the light to remain on, from 5 to 90 seconds.
Keep children and bystanders away from the work area while operating. Do not allow children to handle the solar powered light. Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards in your work area. Some of these hazards may be hidden from your view and may cause personal injury and/or property damage if contacted. ⚠WARNING PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operating the tool.
Make sure this is clear of obstacles such as cables and electric lines. Secure the lamp to the wall with the screws provided. Carefully route the wire from the solar panel to the lamp and plug it into the battery housing input. Adjust the motion sensor so that it faces the area where motion detection is desired. You can move it up and down by adjusting the screw on the neck of the motion detector.
Before Each Use ⚠WARNING Solar lights require sunlight to function properly. Extended periods of cloudy weather will cause shorter runtimes. Shade on the solar panel is to be avoided. The solar panel may be cleaned with a clean, damp cloth. Do not use soap, solvents, or abrasives. A regular visual inspection is recommended. Ensure that the solar panel is free from debris and in a location where it will receive several hours of sunlight each day.
Location of Solar Light Solar powered lights require sunlight to recharge the internal batteries. For best results, place the light in a position where it will receive direct sunlight, generally free from cover and shade. Maintenance Maintain the light by adopting a program of conscientious repair and maintenance in accordance with the following recommended procedures. Maintenance Interval Maintenance Point Allow the light to charge in the light for two sunny days.
Troubleshooting Use the table below to troubleshoot problems before contacting service personnel or your local dealer. If the problem continues after troubleshooting, call your local dealer for assistance. Failure Possible Cause Corrective Action Ensure the solar panel is in a location where it will receive maximum sunlight during daytime hours. Batteries are not charged. Turn the light to the OFF position and allow the solar panel to charge the batteries for two sunny days.
Failure Possible Cause Batteries are not fully charged. Light does not stay on as long as it previously did or it flashes. Corrective Action Ensure the solar panel is in a location where it will receive maximum sunlight during daytime hours. Turn the light to the OFF position and allow the solar panel to charge the batteries for two sunny days. Solar panel is not receiving enough sunlight and not able to recharge batteries. Clean the solar panel with a clean, damp cloth.
Parts List Reference 1 2 3 4 5 Part Description Lamp Solar Panel Screws and Anchors (pack) Mounting Bracket Manual Quantity 1 1 1 1 1 Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or "Us'') warrants to the original purchaser only ("You'' or “Your”) that the Ironton product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.