30In. Orbital Drum Fan Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Strongway™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This fan is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operation Warnings .......................
Intended Use The Strongway 30 Inch Orbital Drum Fan is a tilted direct drive drum fan which directs airflow where needed. It has a heavy-duty construction with a powerful air circulator. Its handle and wheels provide easy mobility. Technical Specifications Item No. Size Volts/Hz. Current (A) CFM RPM 57935 30 in. 120V/60Hz. 2.9 9100 1100 Important Safety Information ⚠WARNING Read and understand all instructions.
children to handle the product. Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards in your work area. Some of these hazards may be hidden from your view and may cause personal injury and/or property damage if contacted. ⚠WARNING PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operating the tool. Do not use the tool while you are tired or under the influence of drugs, alcohol, or medication.
Specific Operation Warnings ⚠WARNING To prevent serious injury or property damage, read and understand owner’s manual before operating. Electric shock hazard. Do not expose the unit or the plug to water or rain. Do not use the fan near a water source such as a swimming pool, bathtub, or shower. Be sure the fan is properly grounded. Do not use this fan with any solid state speed control device. Only plug the unit into a power outlet with the same voltage as rated voltage of it.
down, grounding provides a low resistance path to carry electricity away from the user, reducing the risk of electric shock. (See Figure A.) The grounding prong in the plug is connected through the green wire inside the cord to the grounding system in the tool. The green wire in the cord must be the only wire connected to the tool’s grounding system and must never be attached to an electrically live terminal.
0-6 6-10 10-12 12-16 25' 18 AWG 18 AWG 16 AWG 14 AWG 50' 16 AWG 16 AWG 16 AWG 12 AWG 100' 150' 16 AWG 14 AWG 14 AWG 12 AWG 14 AWG 12 AWG NOT RECOMMENDED When using more than one extension cord to make up the total length, make sure each cord contains at least the minimum wire size required. If you are using one extension cord for more than one tool, add the nameplate amperes and use the sum to determine the required minimum cord size.
2. Select the preferred speed (1-Low or 2-High) by rotating the switch knob After Each Use Always turn off (0-Off) and unplug the fan after using. Maintenance Maintain your fan. It is recommended that the general condition of any fan be examined before it is used. Keep your fan in good repair by adopting a program of conscientious repair and maintenance in accordance with the recommended procedures found in this manual. 1.
Parts Diagram Parts List Reference 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Part Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Part Description Logo plate Front blade Blade Drum body Orbital ring Rear guard Motor Switch box Power cord Capacitor Adjusting knob Handle Bracket Wheel Page 10 of 13 Quantity 1 1 1 1 1 1 1 1 1 1 2 2 1 2
Replacement Parts 1. For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. 2. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence. 3. When ordering parts, the following will be required: Model Number, Serial Number/Lot Date Code, and Description. 4.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or "Us'') warrants to the original purchaser only ("You'' or "Your") that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.