30 InchMisting Pedestal Fan Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Strongway®product! For future reference, please complete the owner’s record below: Serial Number/LotDate Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This fanis designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Packaging Contents .............................................................................................................................. 4 Technical Specifications ...................................................................................................................... 5 Important Safety Information .................
Intended Use The Strongway 30 Inch Misting Pedestal Fan is ideal for home, garages, workshops, greenhouses, garden areas, and other areas needing a misting fan.
Technical Specifications Property Motor Diameter Airflow Max Current Consumption Max Working Pressure Specification 120Volt AC / Direct Drive 30” 7200 CFM 2.0 Amps N/A Important Safety Information ⚠WARNING • Read and understand all instructions. Failure to follow all instructions may result in serious injury or property damage. • The warnings, cautions, and instructions in this manual cannot cover all possible conditions or situations that could occur.
⚠WARNING PERSONAL SAFETY • Stay alert, watch what you are doing, and use common sense when operating the tool. Do not use the tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating the tool may result in serious personal injury. • Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
• Be sure the fan is properly grounded. • Do not use this fan with any solid-state speed control device. • Only plug the unit into a power outlet with the same voltage as rated voltage of it. • Rotating blade hazard. Keep hands clear to avoid serious injury. • Do not operate in the presence of explosive and/or flammable fumes. • Always disconnect the power before servicing and cleaning or moving the fan to a new location.
Extension Cords ⚠WARNING • USE A PROPER EXTENSION CORD. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage, resulting in loss of power and cause overheating. • Be sure your extension cord is properly wired and in good condition. Always replace a damaged extension cord or have it repaired by a qualified person before using it.
Main Parts of Fan Parts List Part No. 1 2 3 4 5 6 7 8 9 10 Description Misting Device Front Guard Blade Rear Guard Motor Power Cord with GFCI plug Upper Pole Spring Lower Pole Base Quantity 1 1 1 1 1 1 1 1 1 1 Assembly Instructions 1. Insert five screws (2) through the holes in the standing pole (1) and then attach the standing pole to the base (3).
2. Loosen and remove the three screws (1) on the height, adjusting base on the upper connectingpole (2). Place the spring(4) into the standing pole(4). Insert the upper connecting pole (2) into thestanding pole (4), making sure the holes on the height adjusting base and the standing pole (4) arealigned. Insert the three screws (1) into the standing pole (4) and tighten them. Adjust theheight of the upper connecting pole (2) as desired and secure using the adjusting knob. 3.
4. Remove four sets of hexagonal nuts, spring washers, and big washers from the motor.Save them for step 5. 5. Attach the rear guard (4) to the screws found on the motor and secure them together usingfour bowl washers (1), four spring washers (2), and four nuts (3) from step 4.
6. Attach the blade (2) to the shaft on the motorand secure them together using two screws (1). 7. Attach the front guard (1) to the rear guard (2) and secure them together using the clips on thefront guard. 8. Secure the assembly on the front and rear guard by tightening the screw(1) and nut(2) on thebottom of them.
9. Connect the misting switch (1) to the water pipe (2) and tighten it. Turn the switch (open) to open the misting function. Turn the switch (close) to close the misting function. Before Each Use Place the fan on a safe, flat surface where it cannot fall or be pulled by the cord. Operating Instructions ⚠WARNING • Electric shock hazard. Do not expose the unit or the plug to water or rain. Do not use the fan near a water source such as a swimming pool, bathtub, or shower.
• Rotating blade hazard. Keep hands clear to avoid serious injury. • Do not operate in the presence of explosive and/or flammable fumes. • Do not plug/unplug the fan into/from the electrical outlet while wet or standing in a wet or damp area. • Never operate the fan without the guard in place. • Do not place the fan in or near a window. Rain may create an electrical hazard. • Do not operate any fan with a damaged cord or plug.
Misting Nozzle Maintenance • If the misting nozzles become clogged, remove them from grill and washthem by water. Use a non-metallic brush to scrub them if necessary, if theobstacle still exists, use the replacement nozzle or contact the customerservice for assistance.
Troubleshooting Use the table below to troubleshoot problems before contacting service personnel or your local dealer. If the problem continues after troubleshooting, call your local dealer for assistance. Symptom Possible Cause(s) Corrective Action Fan may not be plugged in. Make sure the fan is pluggedin and electrical outlet isworking properly. There may be some obstructions in the fan. Check for any obstruction. Ifyou find an obstruction, turnthe fanOFF.
Parts Diagram Parts List Reference 1 2 3 4 5 6 7 8 9 10 Part Number 1 2 3 4 5 6 7 8 9 10 Part Description Misting Device Front Guard Blade Rear Guard Motor Power Cord with GFCI Plug Upper Pole Spring Lower Pole Base Quantity 1 1 1 1 1 1 1 1 1 1 Replacement Parts • For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. • Not all product components are available for replacement.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or "Us'') warrants to the original purchaser only ("You'' or "Your") that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one yearfrom date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.