Poly Strapping Tensioner & Cutter Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Strongway product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This Poly Strapping Tensioner & Cutter is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Operating Instructions .......................................................................................................................... 5 Parts Diagram ...................................
Intended Use This Strongway Poly Strapping Tensioner and Cutter is used with 1/2 inch to 5/8 inch poly strapping. Important Safety Information ⚠WARNING Read and understand all instructions. Failure to follow all instructions may result in serious injury or property damage. The warnings, cautions, and instructions in this manual cannot cover all possible conditions or situations that could occur. Exercise common sense and caution when using this tensioner and cutter.
cutter. Do not use the tensioner and cutter while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating the tool may result in serious personal injury. Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. Air vents on the tool often cover moving parts and should be avoided.
2. Place the other end of the strapping into the unit from left to right. 3. Move the handle to create tension in the strapping. 4. Press the handle down to cut off the strapping.
Parts Diagram Page 7 of 11
Parts List Reference 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 Part Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 17 18 19 22 24 25 28 29 30 31 32 33 35 36 38 40 41 42 43 47 48 49 50 53 Part Description Housing assembly Tension shaft right sleeve Tension shaft left sleeve Camshaft right sleeve Camshaft left sleeve Tension shaft left sleeve Gripper stud (only ORS 1100.
Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence. When ordering parts, the following information will be required: item description, item model number, item serial number/item lot date code, and the replacement part reference number.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.