2Ft. x 12Ft. Pop-Up Straight-Leg Canopy CANOPY Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
® Thank you very much for choosing a Strongway product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This canopy is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Packaging Contents .............................................................................................................................. 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information .................
Intended Use The Strongway 12Ft. x 12Ft. Pop-Up Straight-Leg Canopy is water and fade resistant. It’s ideal for backyard parties, commercial events, camping, tailgating activities, and much more. The canopy is not intended to be a permanent or semi- permanent structure. It is designed to be used for short periods of time only. The canopy should be taken down and stored when not in use.
⚠WARNING WORK AREA SAFETY Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit. Cluttered, wet, or dark work areas can result in injury. Using the product in confined work areas may put you dangerously close to cutting tools and rotating parts. Do not use the product where there is a risk of causing a fire or an explosion; e.g., in the presence of flammable liquids, gases, or dust.
When canopy is not in use, store it inside, and in a secure place out of the reach of children. Inspect it for good working condition prior to storage and before re-use. ⚠WARNING KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS TENT FABRIC. This tent meets the flammability requirements of CAPAI-84 and NFPA 701, The fabric may burn if left in continuous contact with any flame source. The application of any foreign substance to the tent fabric may render the flame-resistant properties ineffective.
Step 2: Cover the frame with the fabric top. 1) Lay the fabric over the roof. 2) Line up all corners and adjust from the opposite sides. The fabric will fit snugly. 3) Locate the nylon fasteners on the underside of fabric body and attach them to the roof frame. Step 3: Extend the legs. 1) Step on the frame leg base. 2) Working from opposite sides, slide the roof lock mechanisms (located on the upper leg portion) upward until they lock into place.
2) To stabilize the canopy, unroll the guy rope on the corner of the canopy. Tie the other end to the stake, and then drive the stake into the ground to secure it. (Adjust the stake position to tighten up the guy rope.) Repeat for each guy rope. After Each Use ⚠WARNING Read and understand all instructions. Failure to follow all instructions listed below may result in serious injury.
4) Pull the pull-pin found on each leg, at each upper corner of the frame, making sure that all sides are detached from the snap button. Slowly slide the roof line downward while walking in. This will completely collapse the frame. Step 3: Store the canopy and accessories in the carrying bag. 1) To prolong the life of your canopy, you will need to store it correctly. Place the folded frame ‘feet first’ toward the carrying bag wheels. 2) Return the stakes to their stake bag and place alongside the frame.
Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence. When ordering parts, the following information will be required: item description, item model number, item serial number/item lot date code, and the replacement part reference number.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or "Us'') warrants to the original purchaser only ("You'' or "Your") that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.