500 Amp Powerpack Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Strongway™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This powerpack is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Specifications ........................................................................................................................................ 4 Important Safety Information ............................................................................................................... 5 First Aid .................................
Intended Use The Strongway 200W 500A Powerpack is easy to use and designed for years of reliable service. It can run many DC appliances whenever you need power for work or play, at home or on the road. The 500 Amp powerpack has a battery inside, it is designed for Jumpstarting vehicles as SUVs, trucks, and vans.
Important Safety Information ⚠WARNING Read and understand all instructions. Failure to follow all instructions may result in serious injury or property damage. The warnings, cautions, and instructions in this manual cannot cover all possible conditions or situations that could occur. Exercise common sense and caution when using this powerpack. Always be aware of the environment and ensure that the tool is used in a safe and responsible manner.
not use the powerpack while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating the tool may result in serious personal injury. Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. Air vents on the tool often cover moving parts and should be avoided.
Disconnect the power/air supply from the product and place the switch in the locked or off position before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally. Store the powerpack when it is not in use. Store it in a dry, secure place out of the reach of children. Inspect the tool for good working condition prior to storage and before re-use.
First Aid SKIN: if battery acid contacts skin or clothing, wash immediately with soap and water for at least 10 minutes. If redness, pain, or irritation occurs, seek medical attention. EYES: if battery acid comes in contact with eyes, flush eyes immediately, for a minimum of 15 minutes and seek immediate medical attention. Main Parts of Product Reference.
Charge unit fully prior to each use. Follow all instructions published by the battery manufacturer and the manufacturer of the equipment in which the battery is installed. Make sure the area around the battery is well-ventilated. Never smoke or allow a spark or flame in vicinity of the engine or batteries. Batteries contain acid and produce explosive gases. Shield eyes and face from batteries at all times.
5. Press the “inverter” ON/OFF switch button to turn off inverter after each use. 6. Recharge the powerpack immediately after use. Refer to Recharging the Powerpack with AC Charger Operating 12V DC Appliances 1. Press the “DC” ON/OFF switch button to activate the DC sockets, you can see indication on LCD screen and battery voltage and status. Make sure the battery is fully charged before use. 2. Open the DC outlet plastic cover. 3. Plug the power cord of DC appliance into the DC socket 4.
Follow these instructions carefully for boosting your vehicle. The instructions may be different from those mentioned for other boosting products or cables. Do not crank the engine for more than 5 seconds. The booster pack feature is designed only for short term operation. Failure to comply may cause damage to the device. 1. Make sure your vehicle is a negative ground system. If it is a positive ground system vehicle or you are unsure, please consult the vehicle’s owner’s manual. 2.
⚠CAUTION EQUIPMENT DAMAGE Use only the supplied boost cables to boost a vehicle or boat engine that has a 12V starting battery. Ensure that the powerpack is placed away from the moving parts of the engine and powerpack power ON/OFF switch is in OFF position. Make sure the cable clamps are connected correctly to the battery terminals. A reversed polarity connection (positive to negative) may cause a spark and damage the equipment.
9. Lift the locking lever of the valve connector back to the fully extended (upright) position and unlatch from tire valve. Stow the air compressor fill hose back in the storage . 10. Reinstall the valve cap back onto the tire valve stem. 11. Recharge the unit after each use. Recharging the Battery ⚠WARNING Always ensure that internal battery is fully charged. Do not overcharge the battery.
Extending battery lifespan Recharge the battery at least once every 90 days. This will extend the durability and efficiency of the battery. Troubleshooting Use the table below to troubleshoot problems before contacting service personnel or your local dealer. If the problem continues after troubleshooting, call your local dealer for assistance. Failure The powerpack does not jump start vehicle No charging indication on LCD screen when recharging Not fully charged unit for more than 72 hours.
Parts List Reference 1 2 3 Part Description Powerpack unit AC charger Manual Quantity 1 1 1 Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.