Pure Sine Wave Power Inverter Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Strongway™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This inverter is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 5 Specific Operation Warnings .......................
Intended Use The Strongway Pure Sine Wave Power Inverter is a high-performance solution for using household power while on the road. Connected to the 12 volt output power source, the inverter efficiently and reliably supplies 115V/60Hz AC power for a wide variety of loads like laptops, microwaves, and cellular phones with power consumption under the rated watts. With proper care and appropriate use, the inverter will give you years of dependable service in your car, truck, or RV.
#53068 Property AC Output Frequency AC Output Waveform USB Power Output DC Output Voltage DC Power Specification DC Input Voltage Range Battery Drain Without AC Load Low Battery Shut-down Point (nominal) High Battery Shut-down Point (nominal) Efficiency (maximum) Physical Specifications Ambient Operating Temperature Range #53068 Specification 58Hz - 62Hz Pure Sine Wave 5V DC, 500mA 11V to 15V DC ≤ 0.8A (at a 12V input) 10.5 ± 0.3V DC 15.5 ± 0.
flammable liquids, gases, or dust. Keep children and bystanders away from the work area while operating the tool. Do not allow children to handle the product. ⚠WARNING PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operating the tool. Do not use the tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating the tool may result in serious personal injury. Dress properly.
Specific Operation Warnings ⚠WARNING SHOCK HAZARD DO NOT expose the inverter to rain, snow, spray, or bilge water. Make sure the inverter wiring is of proper size and rating and in good condition. Operating the inverter with damaged wiring may void warranty. DO NOT use the inverter if it has been dropped, hit, worn, broken, or damaged.
NEVER smoke while handling the inverter. DO NOT operate the inverter in an enclosed area containing automotive type lead-acid batteries. These types of batteries emit explosive hydrogen gas that can be ignited by sparks. To prevent the risk of sparks, DO NOT remove the battery with any of the accessories attached. CHEMICAL HAZARD Remove all metal items such as rings, bracelets, and watches when working with the lead-acid batteries.
Reference 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Subassembly Output power indicator (W) (not applicable for #53068) USB port Remote switch port (not applicable for #53068) Power switch button Digital display (not applicable for #53068-LED power/ fault) AC Outlets Cooling fan and ventilation opening Input voltage indicator (V) (not applicable for #53068） Output power indicator (kW) (not applicable for #53068） Positive DC terminal Negative DC terminal Cooling fan and ventilation opening Ground terminal (not app
6. Connect a 14AWG stranded insulated wire to the inverter ground terminal and connect the other end to the ground. Before Each Use Before installing the inverter, make sure the location meets the following conditions. This inverter has a mounting bracket. To secure and fasten your inverter, please mount the inverter. Dry Don't drop or pour any liquid on the inverter. Cool Keep the inverter from direct lighting. Ventilated Safe Leave at least 2" of clearance around the inverter for air flow.
Protected from battery gases Do not operate where it will be exposed to battery gases. Prolonged exposure can damage the inverter. The inverter should be connected to your vehicle’s 12V power supply with the DC cables. We recommend that the equipment or appliance switch be in the OFF position prior to plugging into the AC receptacle of the inverter. Operating Instructions ⚠WARNING Before connecting, make sure the cables will be connected correctly.
Troubleshooting Use the table below to troubleshoot problems before contacting service personnel or your local dealer. If the problem continues after troubleshooting, call your local dealer for assistance. #53068 Failure No power, no indicator. The red LED indicator illuminates. Inverter runs small loads but not large ones. #53068 Possible Cause #53068 Corrective Action Battery is defective. Replace battery. Blown fuse. Check and replace fuse. Lose cable connections.
#53069/#53070 Failure The digital display shows “LUP”. The digital display shows “OUP”. The digital display shows “OLP”. The digital display shows “OCP”. The digital display shows “OPP”. No output voltage and voltage indication. Battery is old or properly defective. Replace battery. Battery is not being properly charged. Some chargers are not able to fully recharge a battery. Make sure you use a powerful charger. Power dissipation in DC cables. Use shorter/heavier DC cables.
Reference Part Description Quantity 3 Owner’s manual 1 Image Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or "Us'') warrants to the original purchaser only ("You'' or “Your”) that the Ironton product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
