800-Lb. Combo Drum/Hand Truck Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Strongway™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This hand truck is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operation Warnings .......................
Intended Use The Strongway 800-Lb. Combo Drum/Hand Truck is easy to operate with its combination drum and hand truck functions. It’s made of heavy-gauge steel construction with a powder-coat finish. Technical Specifications Property Description Drum Size Adjusts to 30 or 55 gallon Material Type Steel Load Capacity 800 lb. Wheel Size 10 inch Important Safety Information ⚠WARNING Read and understand all instructions.
⚠WARNING WORK AREA SAFETY Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit. Cluttered, wet, or dark work areas can result in injury. Using the dolly in confined work areas may put you dangerously close to other cutting tools and rotating parts. Keep children and bystanders away from the work area while operating the tool. Do not allow children to handle the dolly.
Do not exceed the rated load capacity. Always check for damaged or worn parts before using the dolly. Broken parts will affect the cradle’s operation. Replace or repair damaged or worn parts immediately. Assembly Instructions Step 1 Place the two 10 inch wheels (1) on the axle. Slide on the washers (2) and insert the pins (3) to attach the wheels.
Step 2 Bend the pin (3). Operating Instructions 1. Pull the ring (4) and turn the hook (5) to secure the drum. 2. If you do not need the hook (5), turn it to the side so it’s out of the way. Check the ring pin (7) and insert the hole (6) to attach the hook.
3. You can easily move the hook (5) up or down depending on the position needed. ⑥ ⑦ Maintenance Maintain your dolly. It is recommended that the general condition of the dolly be examined before it is used. Keep the cradle in good repair by adopting a program of conscientious repair and maintenance in accordance with the recommended procedures found in this manual. Keep the dolly clean. A properly maintained cradle will work more effectively.
Parts Diagram Parts List Part Number Description Quantity 1 10 Inch Tire 2 2 Washer 4 3 Pin 2 Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You" or "Your") that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.