Shutter Exhaust Fan Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Strongway™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This fan is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operation Warnings .......................
Intended Use This Strongway Shutter Exhaust Fan is designed for exhaust and circulation of indoor air to the outside area. Technical Specifications Item# Size Voltage Speeds Watts / Amps CFM / RPM 52847 12” 120 3 85/0.75 840 /1620 52848 16” 120 3 245/2.1 2100 /1620 52849 20” 120 2 250/2.2 2930/1000 52850 24” 120 2 255/2.2 3450/1000 52851 30” 120 2 290/2.9 4665 /1000 Important Safety Information ⚠WARNING Read and understand all instructions.
Do not use the fan where there is a risk of causing a fire or an explosion; e.g., in the presence of flammable liquids, gases, or dust. The product can create sparks, which may ignite the flammable liquids, gases, or dust. Keep children and bystanders away from the work area while operating the fan. Do not allow children to handle the tool. ⚠WARNING PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operating the fan.
Do not leave the fan running unattended. Specific Operation Warnings ⚠WARNING Electric shock hazard. Do not expose fan to water or rain. To reduce risk of fire or electrical shock, do not use this fan with any solid state speed control. Be sure equipment is properly grounded. Do not use an extension cord with this product. Rotating blade hazard. Keep hands clear from blade during operation. DO NOT operate without guards in place. Automatically operated device.
of fuel burning equipment to prevent back drafting. Follow the heating equipment manufacturer's guideline and safety standards such as those published by the National Fire Protection Association (NFPA), and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities. The fan frame and motor must be electrically grounded to a suitable electrical ground, such as a grounded water pipe or ground wire system. Install in interior wall.
Important: Use appropriate screws for framework and wall conditions. 2. To mount the shutter assembly, use the eight pre-punched 1/4" x 1/2" slotted mounting holes of the shutter assembly to attach the unit to the framework. 3. Attach fan to installation wall surface as follows for applicable wall structure: A. Wood Structure - Use 1/4’’ lag screws of appropriate length through each mounting hole. B.
Be sure that both front and rear guard screws are completely tightened in locking position before operation. Operating Instructions This unit is equipped with a speed selector switch, which allows you to select a desired amount of air delivery. Speed Control Select air speed with the pull chain switch: HIGH, MIDDLE, LOW, OFF (3-speed control) or HIGH, LOW, OFF (2-speed control). Maintenance 1. Use a soft damp cloth, then wipe with dry cloth. 2.
Parts List Models: #52847, #52848, #52849, #52850 Part# Description Qty. Part# Description Qty. 1 Shutter 1 2 Blade 1 3 Set Screw 1 4 Rubber Washer 4 5 Grille 1 6 Motor 1 7 Control Box 1 8 Pull Chain Switch 1 9 Bolt / Plain Washer / Star Washer 4 10 Nut / Plain Washer / Split Washer 4 Model: #52851 Part# Description Qty. Part# Description Qty.
Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence. When ordering parts, the following will be required: Model Number, Serial Number/Lot Date Code, Description, and Part Number.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
