Triple COB LED Solar-Powered Motion Security Light Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing an Ironton™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This solar-powered light is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Assembly Instructions .............................
Intended Use This Ironton Triple COB LED Solar-Powered Motion Security Light is versatile, super-bright, and economical to operate. No electricity is required. This eco-friendly light uses a solar panel and rechargeable battery to supply power. With three adjustable heads, you can customize light coverage illuminate one area or multiple areas at the same time. Motion detection provides convenience and energy-savings, automatically turning on light only when motion is detected.
Keep children and bystanders away from the work area while operating. Do not allow children to handle the solar powered light. Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards in your work area. Some of these hazards may be hidden from your view and may cause personal injury and/or property damage if contacted. ⚠WARNING PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operating the tool.
Assembly Instructions 1. 2. 3. 4. 5. 6. 7. 8. The “Solar Sensor Light” should be set up at a location where you desire to have extra lighting to detect persons or objects moving at night or in the dark. Decide where you want to place the Lamp and Solar panel. The Light is equipped with a connecting wire, so the Lamp and Solar panel can be installed up to 15 feet apart. The Solar panel must be set in a location that receives full, direct sunlight a minimum of 8 hours a day.
Before Each Use ⚠WARNING Solar lights require sunlight to function properly. Extended periods of cloudy weather will cause shorter run-times. Shade on the solar panel is to be avoided. The solar panel may be cleaned with a clean damp cloth. Do not use soap, solvents, or abrasives. A regular visual inspection is recommended. Ensure the solar panel is free from debris and in a location where it will receive several hours of sunlight each day.
1. 2. 3. Minimum position – Low Range: large movement is required to trigger the light to turn on. Mid Position - Medium setting. Maximum position - Maximum range: the smaller movements will trigger the light to turn on. LOCATION OF SOLAR LIGHT Solar powered lights require sunlight to recharge the internal batteries. For best results, locate the Solar Panel in a position where it will receive direct sunlight, and is generally free from cover and shade.
Troubleshooting Use the table below to troubleshoot problems before contacting service personnel or your local dealer. If the problem continues after troubleshooting, call your local dealer for assistance. Failure Possible Cause Corrective Action Ensure the solar panel is in a location where it will receive maximum sunlight during daytime hours. Batteries are not charged. Turn the light to the OFF position and allow the solar panel to charge the batteries for two sunny days.
Failure Possible Cause It is winter and there is not as much sunlight as during summer, and the solar panel is not able to recharge the batteries Corrective Action Ensure the solar panel is located in a place where it will receive the maximum amount of sunlight during the day. Remove any object that throws shade on the solar panel. Tilt the solar panel so that it is perpendicular to the sun.
Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence. When ordering parts, the following information will be required: item description, item model number, item serial number/item lot date code, and the replacement part reference number.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or "Us'') warrants to the original purchaser only ("You'' or “Your”) that the Ironton product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.